Trimmer Blades

This Edger Blade is a black, metal blade which is sold individually and comes certified from the manufacturer. Installation is rated as "Easy" and requires a socket set and wrench set. This blade attaches to the drive shaft and is used for edging the grass around driveways and walkways. If this part becomes worn/fatigued/damaged (which may happen after hitting the pavement) you will notice an odd vibration and poor trimming, at which time the part should be replaced.

This is a genuine replacement Blade for the Black and Decker Edgers shown below. This is a new style Blade for these edgers. If this is the first time you have used this new Blade, you will need to order two of the part number 243797-00 Washers for this new Blade. Or you can order part number EB-007AL 7 1/2" Blade (Includes 2 Washers).

These Weed Eater Blades are 8-3/8 x 1-1/2 inch black, metal blades which come individually sold and attach to the output shaft. Installation requires a wrench set and socket set, and is rated as "Easy". This blade is used for edging the grass around walkways and driveways. If the blade hits pavement it may break, and you will notice a vibration or poor trimming, and the part must be replaced. Refer to your make model, and diagrams to ensure you're choosing the correct part.

This is a genuine replacement part sourced directly from the manufacturer. The blade is found on Craftsman edgers. This part is made of metal, and is used to cut through turf to create a clean edge for lawns and flower beds. You will require a wrench when replacing this part. This item is sold individually.

This OEM line cut-off blade trims any excess or protruding string from your trimmer during operation so that it stays at an optimal length within the guard. It is in the guard assembly at the bottom of the trimmer head near the rotating spool where the trimmer line is fed. Over time, it can become dull or worn out. Look for signs of damage such as deformation, bending, or nicks. If not replaced, the trimmer may produce uneven or messy trims and put additional stress on the spool or motor, leading to premature wear or damage. To replace the blade, locate it on the grass deflector assembly and remove its mounting screws. Please note that this blade is sold individually without hardware.

The Cutter Blade (or Cutting blade) is a 7-3/4 inch, silver, metal blade which comes sold in a set of two. They require pliers, and a socket set to install and are rated as "Easy" to install by users. These blades are used for edging level ground sidewalks and driveways. If the part is broken or damaged due to wear from general use, they will become dull and will need to be sharpened or replaced. They attach to the cutting shaft. Refer to your make, model and diagrams to ensure this is the correct part.

This OEM-verified metal trimmer blade attaches to the guard assembly of your string trimmer. Its purpose is to cut off excess or protruding string during operation, keeping the string at an optimal length within the guard. Over time, the blade can become dull or worn out, showing signs of deformation, bends, or cracks. A damaged blade will affect the machine performance, resulting in untidy or poorly trimmed areas as excessive string is released outside the guard. To replace the blade, use a screwdriver to unthread the screw securing it. The blade is sold individually, while the hardware is sold separately.

Keep hedges and shrubs neat with a replacement blade assembly for a cordless hedge trimmer. Its toothed blades move back and forth across each other to cut small branches and leafy growth. Replacement may be needed when the blades are bent, cracked, missing teeth, or unable to move smoothly. A damaged assembly may leave rough cuts, jam during use, or cause strong vibration. Clear away packed leaves and dirt before checking for damage. Before installation, remove the battery and place the tool on a stable surface. Wear protective gloves and keep your hands away from the sharp cutting teeth.

Introducing the Ryobi Guard with Blade Assembly a key component for your appliances. Providing ultimate protection and safety this product also integrates seamlessly into your equipment setup. Crafted with precision and engineered for longevity this guard with blade assembly boasts exceptional durability. It is designed to be easily installed making it suitable both for new appliances and as a replacement part. With its robust nature this guard helps ensure the prolonged life of your appliances. Trust in the Ryobi brand to deliver quality and reliability every time.

This is an OEM part sourced directly from the manufacturer. The blade & gear assembly is designed for use in a hedge trimmer from Black & Decker. This part is made of metal, and is used as the active cutting implement for the machine. You may require a screwdriver or wrench when replacing this part. This item is sold individually.