Trash Compactor Wheels and Rollers

Your Price

$16.40

Trash Compactor Drawer Roller

★★★★★

6 Reviews

PartSelect Number PS11747573

Manufacturer Part Number WP9871602

This bearing roller may also be known as the wheel assembly or the container roller bearing, and it is a piece for your trash bin. The function of this bearing is to work in conjunction with your trash bin to allow the canister to roll free. For this repair you will need a nut driver, a pair of pliers, a screwdriver set, and an adjustable wrench. The most obvious symptom that will require you to replace this part is if your drawer is hard to open and/or close. Your appliance comes with two bearing rollers and it is sold individually.

Fixes these symptoms

Drawer is hard to open and or close
See more...

Installation Instructions

Michael from Morgan Hill, CA

Install NewDrive Gear Kit,( I also added,2 poor nuts and all 4 wheels)

My compactor is quite heavy, I moved it onto the kitchen floor unplugged and removed the cover plate from the bottom exposing the drive gears. The small (pinion ) gear was stripped as well as a section of the drive gear. I followed the video and removed the (fulthy) ram. The interior filth was so great I removed all parts to my garage and spent a lot of time cleaning them especially the ram.By the time my parts arrived, it was all clean and ready to go. I had also found that one of the power nuts was broken and had ordered new wheels and power nuts. Assembly was straight forward and it works like new now, Read more...

Your Price

$26.16

Trash Compactor Wheel Assembly - Kit of 2

★★★★★

7 Reviews

PartSelect Number PS398587

Manufacturer Part Number 882688

This wheel assembly, or roller assembly, is for a trash compactor. The kit includes two wheels that are approximately 1 inch in diameter each. The wheels allow the trash compactor container to roll in and out of the appliance. You may have to replace the wheel assembly if the container does not roll smoothly. To access the existing wheel kit on your appliance, uninstall appliance from the cabinet, depress foot petal to lift the container off its track, and remove the container from the tracks. This kit is an OEM part sourced from the authentic manufacturer factory.

Fixes these symptoms

Drawer is hard to open and or close
See more...

Installation Instructions

Michael from Morgan Hill, CA

Install NewDrive Gear Kit,( I also added,2 poor nuts and all 4 wheels)

My compactor is quite heavy, I moved it onto the kitchen floor unplugged and removed the cover plate from the bottom exposing the drive gears. The small (pinion ) gear was stripped as well as a section of the drive gear. I followed the video and removed the (fulthy) ram. The interior filth was so great I removed all parts to my garage and spent a lot of time cleaning them especially the ram.By the time my parts arrived, it was all clean and ready to go. I had also found that one of the power nuts was broken and had ordered new wheels and power nuts. Assembly was straight forward and it works like new now, Read more...