My Orders
Tanaka Parts
GET YOUR OFFICIAL Tanaka PARTS TO ENSURE VICTORY
Shop By Appliance
View MorePopular Tanaka Parts
This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sold individually. This part will be found in various locations, depending on your model; refer to your owners manual to locate it on your machine, but is commonly found on the side of the air cleaner or carburetor.
To complete this repair, you will need a screwdriver. The Purge Bulb needs to be replaced when it is cracked or damaged. It will become fatigued through regular use and may leak fuel when it is malfunctioning.
Customers rated this repair as Easy.
This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sold individually. This part will be found in various locations, depending on your model; refer to your owners manual to locate it on your machine, but is commonly found on the side of the air cleaner or carburetor.
To complete this repair, you will need a screwdriver. The Purge Bulb needs to be replaced when it is cracked or damaged. It will become fatigued through regular use and may leak fuel when it is malfunctioning.
Customers rated this repair as Easy.
Installation Instructions
Richard from SPRING HILL, FL
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
The 6691716 Fuel Cap Assembly Orange is a genuine Tanaka replacement part. It purpose is to keep the fuel in the fuel tank. It is removed from the fuel tank to refill the tank. It includes a retainer that remains in the tank to keep the fuel cap from being lost or falling on the ground and getting dirt and debris on it and contaminating the tank.
The 6691716 Fuel Cap Assembly Orange is a genuine Tanaka replacement part. It purpose is to keep the fuel in the fuel tank. It is removed from the fuel tank to refill the tank. It includes a retainer that remains in the tank to keep the fuel cap from being lost or falling on the ground and getting dirt and debris on it and contaminating the tank.
Genuine Hitachi replacement part,this item is sold individually. This Fuel Line is the line that connects to the fuel filter inside the fuel tank. It delivers the fuel to the carburetor by pumping the primer bulb. If you want to replace the Fuel Tank Grommet , it will have to be ordered individually, it is part number 6685308.
Genuine Hitachi replacement part,this item is sold individually. This Fuel Line is the line that connects to the fuel filter inside the fuel tank. It delivers the fuel to the carburetor by pumping the primer bulb. If you want to replace the Fuel Tank Grommet , it will have to be ordered individually, it is part number 6685308.
This is a genuine item that is supplied by the original equipment manufacturer for Tanaka lawn and garden equipment. It is an identical replacement for a missing or damaged arm-clutch that was installed in a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and installation of this component. This high-quality part is made of durable metal and is sold individually, keep in mind the hardware to secure it is sold separately.
This is a genuine item that is supplied by the original equipment manufacturer for Tanaka lawn and garden equipment. It is an identical replacement for a missing or damaged arm-clutch that was installed in a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and installation of this component. This high-quality part is made of durable metal and is sold individually, keep in mind the hardware to secure it is sold separately.
This authentic part is supplied by the original equipment manufacturer for use with Tanaka and Hitachi equipment. The spring is utilized to apply tension to the clutch mechanism. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality spring is made of durable metal and is sold as an individual item. Check the diagrams for your model to ensure the proper repair procedure. A wrench set, a screwdriver, and pliers might be needed to replace this clutch spring.
This authentic part is supplied by the original equipment manufacturer for use with Tanaka and Hitachi equipment. The spring is utilized to apply tension to the clutch mechanism. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality spring is made of durable metal and is sold as an individual item. Check the diagrams for your model to ensure the proper repair procedure. A wrench set, a screwdriver, and pliers might be needed to replace this clutch spring.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This is an authentic replacement part which is manufactured for use with Tanaka handheld outdoor power equipment. The clutch along with the clutch drum allow a machine to idle without moving the drive shaft. When the throttle is engaged the clutch expands into the clutch drum which turns the drive shaft. If the clutch spring fails the clutch will not engage the drum and driveshaft, so the engine will run, but the machine will not move. To ensure the correct repair procedure, check the diagrams for your model. Keep in mind this high-quality spring-clutch is made of durable metal and is sold as an individual item.
This is an authentic replacement part which is manufactured for use with Tanaka handheld outdoor power equipment. The clutch along with the clutch drum allow a machine to idle without moving the drive shaft. When the throttle is engaged the clutch expands into the clutch drum which turns the drive shaft. If the clutch spring fails the clutch will not engage the drum and driveshaft, so the engine will run, but the machine will not move. To ensure the correct repair procedure, check the diagrams for your model. Keep in mind this high-quality spring-clutch is made of durable metal and is sold as an individual item.
This carburetor gasket helps create a tight seal between the carburetor and engine to ensure proper airflow and fuel metering during operation. By preventing air leaks, it supports smooth running, consistent power, and reliable starting in high-output handheld equipment. Ideal for replacing a cracked, hardened, or torn gasket, this small but critical component helps restore proper engine performance and maintain efficient operation of leaf blowers and vacuums.
This carburetor gasket helps create a tight seal between the carburetor and engine to ensure proper airflow and fuel metering during operation. By preventing air leaks, it supports smooth running, consistent power, and reliable starting in high-output handheld equipment. Ideal for replacing a cracked, hardened, or torn gasket, this small but critical component helps restore proper engine performance and maintain efficient operation of leaf blowers and vacuums.
This is a genuine replacement part sourced from the original manufacturer for use with power tools and small engines. Metal ball bearings are commonly used to reduce friction between a rotating shaft and a fixed part assembly. This bearing is compatible with several different types of equipment and its application can vary based on the model. The bearing is sold individually.
This is a genuine replacement part sourced from the original manufacturer for use with power tools and small engines. Metal ball bearings are commonly used to reduce friction between a rotating shaft and a fixed part assembly. This bearing is compatible with several different types of equipment and its application can vary based on the model. The bearing is sold individually.
This fuel line/pipe is a genuine manufacturer approved replacement part. It is commonly used with Tanaka gas powered engines. The fuel line is what delivers the fuel from the fuel tank into the carburetor. Over time it will deteriorate, become brittle and may crack. This item is made out of flexible plastic material and it is sold individually.
This fuel line/pipe is a genuine manufacturer approved replacement part. It is commonly used with Tanaka gas powered engines. The fuel line is what delivers the fuel from the fuel tank into the carburetor. Over time it will deteriorate, become brittle and may crack. This item is made out of flexible plastic material and it is sold individually.
