Sweeper Hoses and Tubes

This is a genuine OEM replacement part guaranteed to fit the leaf blowers/vacs/mulchers listed below. This accessory, known to Black & Decker as the Leaf Blaster attachment, features adjustable oscillation. It connects to the lower blow tube's end. No special tools are required for installation. Sold individually.

This vacuum tube is an OEM part used in blower vacuums when the equipment is set to vacuum mode. The tube is connected to the equipment intake opening, and it connects the body of the blower vacuum to the lower vacuum tube. It aids in directing airflow and debris into the vacuum bag/collection chamber. The tube can fail due to cracks, breaks, or blockages caused by impact or general wear and tear. A faulty vacuum tube will cause the blower to lose suction power, and its ability to contain dirt and debris. Locate the faulty tube on the underside of the blower unit and detach it from the blower vacuum. Align the new tube with the attachment points and lock it in place.

This plastic upper tube on your blower helps to control the airflow for more precise directing of leaves and debris. It connects the main body to the lower tube. You can identify a broken upper tube through visible damage or a loose fit. If not replaced, it will result in less focused airflow, making debris blowing less effective. To remove the upper tube, depress the lock button and slide it off the housing neck, along with the lower tube. Installing a new tube is as simple as snapping it into place. This OEM replacement part is sold separately from the lower tube.

This is an authentic Black and Decker replacement part manufactured for use with blower/vacs. This plastic lower tube is the bottom portion of the vacuum tube assembly. The lower tube is available as an individual replacement part, please see model diagram for associative parts.

This clear tube, also known as an upper chute attachment, is designed for use within a twin catcher, or grass collection system. This tube is part of the chute assembly and is used to make it easier for the clippings to transfer between the cutting deck on your lawn mower to the collection bags. This chute is compatible with various models of lawn mower, both ride-on and push mower. This tube is made of clear plastic and comes as an individual part, without any of the securing connectors or hardware. To replace this tube, you will need a screwdriver or wrench to unscrew and disconnect any connectors, before you can twist the old tube out and replace it with the new one.