Sprayer Bearings

This single-row, deep-groove ball bearing is sized at 12x32x10mm and is made of durable metal. It is used to reduce friction and vibrations when it is in between two parts that are rotating or moving against each other. This bearing can handle forces that are applied to it up-and-down and sideways, also known as radial and axial loads. It is easy to install and can handle high rotational speeds without causing too much vibration or making much noise. Over time, this ball bearing wears out from heat and pressure and starts to fail. If the engine of your machine has been run without oil in the gas tank, this ball bearing can seize. In these situations, you will need to replace the ball bearings. Otherwise, you will notice that your machine overheats, works harder because of the increased friction it is handling, and produces excessive vibration and noise. To extract a ball bearing from your machine, you will need to insert a flat-head screwdriver through the bearing opening and against the seal. Then, tap the seal out with a mallet. Afterwards, slot a socket through the diameter of the bearing, and tap the entire bearing out of its place by again using a mallet. This authentic OEM part is sold individually, so be sure to refer to your user manual to verify how many bearings your machine needs and where they are in it.

This metal flange bearing is an authentic manufacturer-sourced component which is designed for use in lawn and garden outdoor equipment. It is bronze in color, with 6 six flat sides, and it has an inner diameter of 0.75 inches, and a height of 1 inch. It also features a protruding circular rim on one end, known as a flange, which keeps the bearing stable and secure. The bearing serves as a support mechanism, allowing rotating parts to move smoothly with minimal friction. Over time the bearing may wear down, crack, or fall off causing excessive noise, reduced performance, and potential damage to the snowblower impeller or auger. Use a bearing puller tool to pry the bearing off the equipment. Align the new flange bearing with the mounting holes and secure it in place.

This is an authentic Toro replacement part manufactured for use with lawn tractors. The special insulator bushing is used to seal the fitting between the fuel valve and the fuel tank and to prevent damage to either part. This bushing is available as an individual replacement part, please see model diagram for associative parts.

This silver metal Ball Bearing is manufacturer certified, and used to reduce the friction between parts, and comes individually sold. If broken or worn down, you will hear a grinding, growling, stretching, or rumbling sound, and the part should be replaced. Installing this new part requires a bearing puller. Refer to your make, model and diagram to check if this is the right part.

This sealed ball bearing is engineered to support smooth, high-speed rotation in mower deck spindles, electric motors, and snow-clearing equipment. Featuring dual rubber seals, it helps keep out dust, moisture, and debris while retaining lubrication for long service life under demanding conditions. Designed to reduce friction and heat buildup, this bearing is ideal for replacing a noisy, rough, or worn bearing to restore stable spindle operation, consistent blade rotation, and reliable equipment performance.

This authentic OEM sourced replacement part is specially designed for use with Shindaiwa and Echo handheld lawn and garden equipment. Ball bearings are generally utilized to reduce the friction between rotating parts. The rollers help to distribute the weight while the minimal contact area of the ball reduces friction. For correct location and use of this bearing make sure to check appropriate diagrams of your unit. This part is made from high-quality metal and it is sold individually.