Snapper Trimmer Hardware

Snapper Trimmer Lawn Mower Nut This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten using a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

Snapper Trimmer Screw

Snapper Trimmer Nut-flange (left Hand) An authentic manufacturer sourced replacement part that is specially produced for use with handheld lawn and garden equipment. This flange nut is used to secure the edger blade to the spindle. Please note this hardware is sold individually.

Snapper Trimmer Nut-push Pal .312 Dia The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicity. It is made out of metal and is sold individually. During the installation process, a wrench set might be needed to replace this part. Over time this part may break and will need to be replaced.

Snapper Trimmer Wrist Pin Retainer It is a genuine item that is supplied by the original equipment manufacturer for handheld lawn and garden equipment. The wrist pin retainer is an important component which helps to secure the piston pin. If the part is missing or is damaged, this will provide an identical replacement for the original component that was installed on a new unit. Note, this high-quality wrist pin retainer is made of durable metal and is sold as an individual item. Keep in mind, the pin is all sold separately. A screwdriver, a wrench set, and pliers will be needed to perform this repair. To ensure the correct replacement procedure, refer to the appropriate diagrams for your model.

Snapper Trimmer Spacer This is a genuine OEM sourced replacement part which is specially designed for use with handheld lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to appropriate diagrams for correct location and use of this hardware. This pan head screw is made of high-quality metal and it is sold individually.

Snapper Trimmer Bolt, Carriage 5/16-18 This metal carriage bolt is a genuine Craftsman replacement part. This item was designed for use with the snowblowers listed below and is used to safely secure the discharge chute. It is an identical replacement for a missing or damaged bolt that originally came with a new unit. Please make sure to check the appropriate diagram for your model for the correct location and application of this hardware. This item is sold individually.

Snapper Trimmer Bolt, Carriage 5/16-18x1/2 This is an original manufacturer supplied replacement bolt designed for use with Snapper lawn mowers. It is generally used to secure wheel brackets to the deck. It is designed with a square area under bolts head which allows it to stay in place while the lock nut (sold separately) is being tightened. Please note this bolt is sold individually.

Snapper Trimmer Washer, 5/16 This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits your model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause. This is a very easy part to repair and does not require any tools.

Snapper Trimmer Screw This is a genuine OEM sourced replacement tapping screw which is specially designed for use with Paramount and Poulan lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to refer to the appropriate diagrams for the correct location and application of this part. This high-quality hex socket head screw is made of durable metal and it is sold individually.