Ryobi Edger Hardware

Ryobi Edger Flanged Washer

★★★★★

★★★★★

1 Review

This flanged star washer is a manufacturer-sourced replacement part designed for use trimmers. It is also known as a tooth lock washer due to its serrated inner edge which resembles inward facing teeth. These teeth bite into the head of the fastener and provide a better grip than standard washers. This washer also has a flange on one side which is a lip that extends past the edge of the washer. It helps to distribute the load of the fastener over a wider area to provide extra stability and a more secure hold. Over time the washer may wear down or become damaged. To remove the washer, first unthread the bolt/screw it is fastened on. Use pliers to grip the washer and gently twist it off. Place the new washer over the fastener with the teeth facing toward the surface being fastened and insert it into the designated hole. Ensure that it is locked into place. Each washer is sold individually.

Ryobi Edger St Screw , Steel M4 L= 14mm Bl This part is an OEM from Ryobi. The screw (m4 x 14mm bl) is compatible with a variety of lawn and garden tools. The metal screw is often used to help secure the housing assembly. This item is sold individually, and a hex key is required for the installation. It is encouraged to purchase spares, as they can wear over time and regular use.

Ryobi Edger Screw, 8-32 X .312 P This is a genuine anti-rotation screw from the Ryobi manufacturer. The metal screw is compatible with many lawn and garden trimmers. This item works to help secure the clutch cover assembly. This part is sold individually. A screwdriver is needed in making the repair.

Ryobi Edger Screw

Ryobi Edger Shoulder Bolt Used in a variety of models of lawn and garden equipment, this Carriage Bolt is around 1 inch long, made of metal, gold in color, is not part of a kit or assembly, and is sold individually. The purpose of this part is to hold parts in place and is used in a variety of locations. This part can become loose through regular use and should be regularly inspected for fatigue and wear. If the threads become stripped, it will need to be replaced. You will need a wrench or socket set and a torque wrench to complete this repair. Refer to your owner's manual to determine how tight it should be. Customers rated this repair as Easy.

Ryobi Edger Nut This is an authentic part which is sourced from original equipment manufacturer. It is generally used on handheld trimmers/edgers. This nut is designed to secure cutting blade to the trimmer shaft. Please note you would need a properly sized wrench when installing/removing this nut. Includes one (1) nut per order.

Ryobi Edger Cupped Washer The cupped washer attaches to the tri-arc blade with the use of the lock nut. This part is an OEM from Ryobi and Homelite to be used in brushcutters and trimmers. It is made of metal and helps to keep the cutting tool in place. A wrench will be needed if this part needs to be replaced. This washer is priced as an individual replacement part.

Ryobi Edger M4 X 28 W/flat Washer & Spring

Ryobi Edger Retaining Washer The retaining washer fits between the blade driver and the spool shaft. It is available individually and is made out of metal. This is a genuine replacement part sourced from the original manufacturer for use with trimmers and edgers made by Ryobi, Troy-Bilt, Bolens, Yard Man, MTD, and Cub Cadet. When replacing this part a screwdriver might be required during the installation process. It will need to be replaced if it becomes broken.

Ryobi Edger Push Nut This part is available as an individual replacement. The push nut attaches to the wheel and is made of plastic. When replacing this item a set of pliers and a hammer may be needed. It will need to be replaced if it becomes broken. This is an authentic Homelite and Ryobi replacement part that is sourced from the original manufacturer for use with trimmers and edgers.