Royal Parts

Royal Style 21 Belt This is a genuine Royal replacement part that is sourced from the original manufacturer to ensure quality. The belt is used to link the motor drive shaft and the brush roll assembly. This item allows the motor and brushroll to rotate in unison. This part is sold as an individual replacement part.

Royal Roller Lifter Assembly It is an authentic manufacturer-supplied item that is designed for use with Hoover and Royal vacuums. This is an identical replacement for a missing or a damaged roller lifter assembly that was installed on a new equipment. It is the component which supports the unit allowing for easy movement. Refer to the appropriate diagrams for your model to ensure the correct repair procedure. The roller lifter assembly is made of durable materials and is sold as an individual item. A screwdriver will be needed to remove and secure the hardware the holds this assembly.

Royal Style 10 Belt These are genuine manufacturer sourced replacement belts used on upright vacuums. It helps to drive the brushroll assembly. These belts are made out of rubber. Includes two (2) belts per order. It is recommended to replace these belts every 6 months to ensure optimum performance. You would need a screwdriver to complete a repair. • First remove nozzle guard • Slide belt off motor shaft • Lift and remove brushroll • Dispose of old belt • Place belt on motor shaft, then slip brushroll through belt • With belt in place, pull and slide brushroll into nozzle • Reattach nozzle guard

Royal Style 5 Belt This is a genuine manufacturer sourced replacement tyle 5 drive belt used on Dirt Devil and Royal upright vacuums. It is used to drive the brush roll assembly. This belt is made out of rubber material and it is sold individually. Over time belts will wear out and stretch requiring replacement. It is recommended to replace these belts every 6 months to ensure optimum performance. Replacing a belt of an upright vacuum is a simple and quick task that should only require a screwdriver. • Ensure the vacuum is unplugged • First remove the bottom plate • Slide the belt off the motor shaft • Lift and remove the brush roll • Remove the old belt • Place the new belt on the motor shaft • Slide the brush roll through the belt • With belt in place, pull and slide brush roll into nozzle • Secure the bottom plate • Reattach nozzle guard

Royal Belt Genuine OEM replacement part, this part is sold individually. The purpose of this belt is to rotate the brush roll assembly on the vacuums shown below. It is situated and installed in different places depending on the vacuum you have. These belts do have a tendency to wear out. It is advised to order an extra one to keep on hand for future use.

Royal Type Y Aire Paper Bag - This authentic item is supplied directly from the original equipment manufacturer for use with Royal vacuums. The paper bag goes inside the bag housing. No tools should be needed to replace this bag when it becomes full. This is available as a pack of seven.

Royal Belt Lifter This belt lifter is an OEM part direct from the original manufacturer for use with Dirt Devil and Royal hand vacuums. This belt lifter is used to adjust the belt on the brush roll and motor shaft. This part is made of black plastic and is sold as an individual replacement part.

Royal Belt Pack Genuine Dirt Devil Style 4/5 Belt fits all Featherlite Uprights that use paper bags, all Swivel Glide Uprights that use paper bags, and all Dirt Devil Vision Uprights. Replace your belts every 3 to 6 months.

Royal Dwt Filter Assembly It is a high quality OEM sourced replacement filter assembly that is specially designed for use with Dirt Devil and Royal carpet cleaners. This is the dirty water filter for the recovery tank. One foam filter in a plastic frame is included per order.

Royal Zipper Hinged Bag Assembly - O It is a genuine OEM sourced item that is specially made for use with Royal vacuums. The purpose of the bag assembly is to collect the dust and dirt when using the equipment. This is an identical replacement for a missing or a damaged component that was included with a new unit. Please make sure to refer to the owner's manual for your model to ensure the correct application. Keep in mind it is made of durable materials and is sold individually.