My Orders
Pressure Washer Repair
Learn how to repair the most common pressure washer problems today! Our repair experts take the most common issues and walk you through the parts that could be causing the problem. We teach you how to troubleshoot and repair your pressure washer. Pressure washer repair does not need to be intimidating or overwhelming, select your symptom below to get started.
Common Broken Pressure Washer Symptoms
Reported ByEngine will not idle
If your pressure washer engine will not idle, if it sputters out, or it keeps stalling you are going to need to check the carburetor and the unloader valve. We walk you through how to troubleshoot this issue, and help you get your pressure washer running again!
Leaks water
If your pressure washer is leaking you are going to need to check a number of seals, such as the inlet seal, the outlet seal, and the piston seal. It is also possible that your pump, or the thermal relief valve are causing leaks. We will help you figure out the issue with your pressure washer.
No or low pressure
If the water coming out of your pressure washer has low pressure or no pressure at all we walk you through how to troubleshoot and fix this problem. We teach you how to check the unloader valve, nozzle, pressure regulator, and hoses. Restore the water pressure in your pressure washer and get back to work!
Cannot shut off pressure
If high-pressure water will not stop flowing out of your pressure washer that is a dangerous situation. Once the engine is stopped, we walk you through inspecting the unloader valve and the trigger wand. Get to the bottom of what is causing this, and repair your pressure washer before you operate it again.