RedMax Snow Blower Parts

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

This shear bolt secures the snowblower auger to the drive shaft while acting as a built-in safety feature. Designed to break under excessive force, it helps protect the gearbox and engine from damage if the auger hits a hard object. Replacing a broken or missing bolt restores proper auger operation and ensures reliable, safe performance.

The carriage bolt attaches to the heavy washer and the front plate. This is a Husqvarna, Bluebird, and Poulan replacement part directly sourced from the manufacturer for use in lawn mowers. This item is available as an individual replacement part and is made of metal. A socket set may be needed during the replacement of this part. Over time this part may break or become stripped and will need to be replaced.

This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.

This is a genuine OEM sourced replacement part commonly used on lawn and garden equipment. This specially designed lock nut resists loosening when it is properly threaded onto a bolt. It is has multiple applications depending on the model of your equipment. Always make sure to check appropriate diagrams for correct use and location of this nut. Includes one item per order. You will need a wrench to tighten or loosen this hex nut.

Reduce rough scraping during snow removal with this lightweight composite skid shoe. It supports the auger housing at the correct height while sliding across the driveway or walkway. The polymer construction provides a durable contact surface and may operate more quietly than a metal shoe. Proper clearance also helps protect the scraper bar and lower housing from unnecessary wear. Check the skid shoes often and replace them when they are cracked, uneven, or heavily worn. Shut off the snow blower and wait for all moving pieces to stop before service. Install both shoes at equal heights and tighten the mounting hardware securely.

This chute base, also known as a discharge chute base, is sourced from the original manufacturer for use with snowblowers. It is found at the end of the discharge chute which is responsible for directing the discharge of snow, or other materials that are being thrown by the equipment. The chute base is found at the end of the discharge chute where it acts as a connection point between the chute and the auger housing. The chute base aids in directing the discharge to a specific place, as well as controlling how far the discharge is thrown. If the chute base becomes damaged, cracked, or worn out, it will need to be replaced. A faulty chute base will result in snow being thrown haphazardly, not being thrown far enough or not thrown at all. It can also create blockages in the equipment, leading to potentially expensive repairs. Remove the fasteners that secure the base to the equipment and pull off the old chute base. Align the new chute with the mounting bracket and secure it with the fasteners.

A snow blower that will not change speed or shift between forward and reverse may have a stretched, frozen, or broken control cable. This replacement cable links the operators speed lever to the ground-drive mechanism. Inspect the lever, cable mounts, linkage, belt, and friction drive before deciding the cable has failed. Verify the equipment model because cable length and end fittings must match exactly. Before service, shut off the engine, remove the key, and disconnect the spark plug wire. Note the original cable path, secure each end correctly, keep it away from hot or moving pieces, and test every drive position after adjustment.

This is an authentic manufacturer-sourced replacement belt. It is specially designed for Poulan snowblowers. This is the special belt that helps to drive the unit. Over time rubber belts tend to wear out and stretch eventually requiring replacements. When replacing this belt, make sure to clean off the drive pulleys to prolong the life of the new belt. This part is made of high-quality rubber material and is sold as an individual component. Check the owner's manual for your equipment to ensure the correct repair procedure. A wrench set and a screwdriver might be needed to perform this repair.

4L x 38.2