Range Timers

Your Price

$110.43

Special Order

Electronic Control Board

★★★★★

(1)

PartSelect Number PS12364897

Manufacturer Part Number 5304511908

This oven control board is for ranges. Oven control board monitors the temperature and controls the oven heat. Unplug the range or shut off the house circuit breaker for the range before servicing the unit. Wear work gloves to protect your hands.

Fixes these symptoms

Little to no heat when baking
Touchpad does not respond
Will Not Start
See more...

Installation Instructions

Glenn from MONETT, MO

Oven would not work

Took 5 screws off back of stove, removed 2 screws from control board, replaced board, put back together, make sure you un plug stove before removing back. Read more...

Your Price

$118.57

In Stock

Range Electronic Control Board

★★★★★

(5)

PartSelect Number PS12074908

Manufacturer Part Number 5304510064

This is an authentic electronic control board, which works with ranges.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven is too hot
See more...

Your Price

$351.31

In Stock

Electronic Clock and Timer Kit

PartSelect Number PS233996

Manufacturer Part Number WB19X10006

This electronic clock replaces the mechanical clocks with a more reliable digital timer. As per the manufacturer, this part should be installed by appliance repair person.

Fixes these symptoms

Timer will not advance
See more...

Installation Instructions

David from Owings Mills, MD

Electronic Timer went out and Top Oven No Longer worked

There are about 12 wires behind the panel...and this was the second time I've replaced the electronic clock in the past four years. I replaced the analog clock four years ago with the digital version because the analog was no longer available, so I knew what I was in for. There are four screw (top of the frame and lower frame) to remove before the frame holding the clock will come out. First DISCONNECT the power! You've have to remove the clock control knobs, and the plastic lever on the self cleaning handle. The first time I ordered this replacement part from PartsSelect there was a diagram included on which wire goes where. This time there wasn't! So it gets a little complicated. Make sure you label all the wired before you disconnect the old clock panel. Anyway, remove the four nuts holding the old clock in place; put the new clock panel in; replace the four nuts. I'll be glad to talk anyone through the rest and I have photos of the whole repair. Read more...