Pressure Washer Valves

Pressure Washer Suction Valve Complete Genuine Karcher replacement part, it is sold individually. This part along with the piston controls the flow of water through the pump assembly. This part has a tendency to wear out. It may be wise to keep a few extra on hand.

Pressure Washer Valve Kit (includes 6 Valves) It is an authentic manufacturer-supplied check valves kit which is designed for use with Mi-T-M equipment. The valves are important components that attach to the pump head to help maintain safe working water pressure at the pump. Unfortunately, over time they may wear out or get damaged eventually requiring replacements. It is a high-quality kit which includes six valves and six O-rings. Make sure to refer to the appropriate diagrams and the owner's manual for your model to ensure the correct repair procedure. A wrench set will be needed to replace these components.

Pressure Washer Valve (3 St Ck) This part is a Retrofit Valve that will work on the older models as well as the newer models. Older units have shorter valves than the new pumps but you can change the length of the stem to adjust for the older units.

Pressure Washer Thermal Relief Valve This is an original part from the Mi-T-M manufacturer. The thermal relief valve is constructed of metal and plastic, and is compatible with many pressure washer machines. This part is fitted into the pump, and has been designed to be a protection from overheating in the bypass gear. This item is sold individually. A wrench set is necessary in the removal and replacement.

Pressure Washer Non Return Valve This is a genuine replacement part sourced directly from the manufacturer. The non return valve is commonly found in Mi-T-M pressure washers. This part is used in the unloader assembly, and includes the metal valve and spring, and a rubber O-ring. You will require a wrench when replacing these items.

Pressure Washer Valve Thermal Relief

★★★★★

★★★★★

1 Review

This thermal relief valve is a genuine part produced by the original manufacturer for DeWALT pressure washers. The valve connects to the pump and protects it from overheating. If the pump gets too hot this valve will pop out to release extra pressure, and prevent excessive damage to the pump. It is an identical replacement for a damaged or a missing component that was installed on a new unit. Note, one durable metal thermal relief valve is included. To replace it you will need an adjustable wrench. Make sure to release the pressure from the tank before starting the repair.

Pressure Washer Valve, Fuel This is an authentic Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with portable generators. The valve attaches to the bottom of the fuel tank and is used to regulate the fuel that exits the tank. This valve is priced as a single item.

Pressure Washer Valve-fuel Shut Off This is an authentic OEM sourced part that is intended to be used with small engines from Briggs & Stratton and Toro. The shut-off valve attaches to the bottom of the fuel tank and is used to link the fuel line and to control the flow of fuel that goes to the engine. This item is available as an individual replacement part.

Pressure Washer Valve Assembly

Pressure Washer Valve (3 Stueck) It is a genuine replacement valve set that is supplied directly from original equipment manufacturer for use with Karcher pressure washers. This item contains a complete set of three check valves that build outlet pressure in the pump. These parts are made from durable high quality plastic with metal, please note the plugs and other components are all sold separately.