Pressure Washer Pumps

Pressure Washer Detergent Suction Kit

★★★★★

★★★★★

1 Review

This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your pressure washer, and includes the main injector valve, two differently sized O-rings, a spring, and a ball bearing. One end of this kit will be threaded into the washer, and the other will lead to your cleaner with a siphon, which is sold separately. This injection kit would need to be replaced if the nozzle is leaking, the injector fails to work properly, or water is getting into the soap dispenser. To replace, simply unscrew the previous injector and remove it, then fit the small O-ring inside the threaded end of the new injector, along with the ball bearing and then spring. Wrap the larger O-ring around the base of the threaded end, and apply a layer of lubricant, before installing the new injector and securing it.

Pressure Washer Unloader Kit This part is an OEM from Ryobi. The pump unloader valve is a pressure washer component. The metal item is designed to relieve the engine from trapped air, and is sold individually. A screwdriver, needle nose pliers and a wrench set are often needed for the installation.

Pressure Washer Pump

Pressure Washer Pump This is a Genuine OEM replacement part designed for use with Ryobi Pressure Washer. This item is made out of Metal and it is Sold Individually. The purpose of the Pump is to create water pressure to operate the Power Washer. There are no internal parts supplied for this pump.

Pressure Washer Spare Pump Horizontal Axial This is an authentic manufacturer-sourced replacement component which is designed for use with Karcher pressure washers. The purpose of the pump assembly is to build up the pressure in the tank. Over time parts may wear out or get damaged eventually requiring a replacement to maintain peak performance. Make sure to refer to the owners manual and the diagrams of your model for the exact location and the correct installation of this assembly. Note, this high-quality metal body pump is sold individually.

Pressure Washer Flange/pump Adapter

Pressure Washer Manifold Housing It is a genuine OEM sourced item that is designed for Briggs and Stratton, Snapper and Troy-Built pressure washers. The manifold housing is an important component that attaches to the pump head. It houses the unloader valve, the check valves, the outlet tube and the chemical injection assembly. If the manifold housing is worn or damaged it can cause water leaks and it should be replaced to ensure the equipment is functioning properly. To determine the exact location and the correct installation of this manifold housing, refer to the appropriate diagrams of your model. You will need a screwdriver and a wrench set to perform this repair. This high-quality manifold housing is made of durable metal and is sold as an individual component.

Pressure Washer Kit, Unloader This is an original replacement part sourced directly from the manufacturer. The unloader kit is commonly found in pressure washers from Briggs & Stratton. This part includes a plug made of high-quality plastic, a metal valve and spring, and two flexible rubber O-rings. You may require a wrench when replacing these parts.

Pressure Washer Pump Assembly

★★★★★

★★★★★

3 Reviews

Pressure washer pump kit. If the pressure washer is leaking water, the pump may need to be rebuilt or replaced. If the pump is more than a few years old, and you use the pressure washer fairly often, replace the pump.

Pressure Washer Pump