Pole Saw Ignitions

Pole Saw Coil-ignition This is an authentic Echo replacement part manufactured for use with outdoor power equipment. The ignition coil generates an electric charge when the magnet in the flywheel passes the ignition coil while the flywheel is spinning. The electric charge is sent through the lead wire to the spark plug, the wire is included, and the spark plug boot is available separately. This ignition coil is sold individually.

Pole Saw Ignition Module-mb20-1 This is an authentic replacement part manufactured for use with Husqvarna gas powered trimmers and brushcutters. The ignition module is used to create an electric charge when the magnet on the flywheel passes, and the charge is sent to the spark plug to ignite the fuel and air inside the combustion chamber. Often times a faulty ignition module will prevent the engine from starting, and this ignition module is sold as an individual replacement part.

Pole Saw Ignition Module Mb50

★★★★★

★★★★★

1 Review

This is a genuine OEM sourced part used on many brushcutter devices. The ignition module mb50 is designed to send electrical current to the spark plug. Constructed of high-quality metal, wiring and rubber, this item is sold individually. An Allen wrench and a pair of pliers are necessary for making the replacement. It is encouraged to refer to the manual for safety and repair instructions.

Pole Saw Ignition Module This is a genuine part that is supplied by the original manufacturer for use with Husqvarna polesaws. The ignition coil generates the voltage for the spark plug. This part comes with the ignition wire, module, and spark plug boot. For this installation, you will need a screwdriver to remove the any engine shrouds or covers, as well as needle nose pliers to disconnect the ignition coil from the engine.

Pole Saw Coil-ignition This is an authentic manufacturer-sourced part which is specially made for use with Echo handheld lawn and garden equipment. The ignition coil generates an electric charge when the magnet in the flywheel passes the ignition coil while the flywheel is spinning. The electric charge is sent through the lead wire to the spark plug. Unfortunately, over time it may wear out and begin to fail eventually requiring a replacement. This high-quality item is sold individually, keep in mind the spark plug boot is sold separately.

Pole Saw Lead - Ignition

Pole Saw Lead - Ignition

Pole Saw Lead - Ignition This is a genuine replacement part sourced from the original manufacturer for use with outdoor power equipment. The special ignition lead is commonly used to link the ignition module and the ignition switch. This ignition lead is available as an individual replacement part, please see illustrated parts list for related parts.

Pole Saw Coil-ignition

Pole Saw Coil-ignition This is an authentic Echo replacement part that has been sourced from the original manufacturer to be used with trimmers, edgers, pruners, and blowers. The ignition coil connects to the short block near the flywheel. This item is used to create and electric charge that is used to ignite the fuel/air inside the cylinder. When an ignition coil fails it will usually cause the engine to turn off abruptly or prevent the motor from starting. The ignition coil is sold as an individual replacement part.