My Orders
Leveling Leg 8193716
Official part for Whirlpool, Kenmore, KitchenAid, Maytag
( Grid squares measure 1x1 inch )
✖
✖
Fits your ADB1400AGS3!
About This Part
What it does. Why it matters. Everything you need to know for an easy fix.
Leveling Leg Specifications
Leveling leg Now includes two different sizes. Use the one for your model. If you need two legs you will need to purchase a QTY of two of this kit.
Part #8193716
Manufactured by
Whirlpool
for Whirlpool, Kenmore, KitchenAid, Maytag
You May Also Need
Because heroes deserve fewer surprise re-installs.
$15.00
In Stock
$20.36
Special Order
Affresh Dishwasher Cleaner Tablets - 6
Part #W10549851
$22.52
In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
Part #W10501250
$28.42
In Stock
$18.22
On Order
$27.36
In Stock
Refrigerator Deodorizer
Part #MCS62101805
$31.58
In Stock
Genuine OEM: Original Parts. Lasting Repairs.
Because quality isn't optional.
OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.
| Features | OEM | Generic |
|---|---|---|
| Genuine brand name | ||
| Guaranteed to fit | ||
| Superior Quality | ||
| Long term value |
Repair Tips
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
Sort by:
- Prev
- 1
- Next
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Water was leaking.
27 of 36 people
found this instruction helpful.
This unit was unique that whole motor assembly was held in its place by two plastic clip. The gasket had few rings that worked as place holder, although gaskets don't go bad often this model could be if it gets pulled alot and if motor assembly get pushed it will push up the gasket and cause a leak. Repair was simple, 1) take spray arm
... Read more
off from inside. 2) get under neath the dishwasher, take off wires so it would free up some room, pulled two plastic holder out, gently push the motor assembly up to the tub, 3) from inside the tub, pull up the assembly enough to get your hand under the gasket and pull them off. 4) Replace the gasket, align the assmebly and push down to snap in the gasket. 5) get under and push in two plastic clip back in, put wires back into its place. Back in the tub to push down the assembly again to make sure there are flush with surface. Put spray arm back on. Finished.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
- Prev
- 1
- Next