Rear Drawer Glide 3051163

Hi Kathie, Thank you for your question. Yes, we do carry the front drawer glide. The part number listed under your model number for the front drawer glide is PS434226. I hope this helps. Thank you and have a great day!

Hello Sheila, thank you for your question. This Rear Drawer Glide is sold individually. Good luck with your repair!

Hi Jean, Thank you for your question. The drawer glides are sold individually. We hope this helps. Thank you and have a great day.

Hello Richard, Thank you for your inquiry. We have included a link to our repair video for this part, and if you need help placing an order for this part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Daniel, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12709839. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Joe, Thank you for your question. If the preheat light remains on once the stove has been turned off, the issue may be with the oven sensor. The oven temperature sensor is the part that monitors the oven temperature and signals the electronic control board to turn the elements on and off. Before removing this part from the oven and testing it with a multimeter for continuity, unplug the oven from the electrical outlet. A normal reading should be 1100 ohms, but as readings vary from model to model, you will need to reference your owner’s manual to determine what the correct reading should be. To test it for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor. If the sensor is fine, you will then need to check the elements, the electronic control board and the wiring between the parts to see which one is causing the issue. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!

Hi Debra, Thank you for your question. Before removing the warmer drawer, turn the power off to the range. Then open the drawer to the fully opened position and locate the latches on both sides of the warmer drawer. Then pull up on the left glide latch and push down on the right glide latch and pull the drawer away from the range. To reinstall the drawer, align the glide latches on both sides of the drawer with the slots on the drawer. Then push the drawer back into the range. We hope this helps!

Hello Claude, thank you for writing. Based on model MEF322WBSE, the front glide is PS434226. And, the Rear Drawer Glide is part PS434227. We have videos for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Hello Sean, thank you for your question. We have researched your model and found that part number PS434227 is compatible with your model. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Hi Nathan, thank you for the great question. There are two types of drawer glides in your range: the front glide drawer, part number PS434226, and the rear glide drawer, part number PS434227. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.