EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Phone
Keep typing for more specific results...

Parts Departments

Top Model Types View All

Expert Repair Videos

Symptoms

Troubleshoot like a pro using your model's symptoms

View symptoms

Model Number Locator

Find your model number to unlock guaranteed fit

Find my model number

Articles & Guides

How to Fix a Samsung Dryer 3C Error Code - PartSelect

If a Samsung dryer is displaying a 3C error code, there is a communication issue with the motor and control board. In this article we’ll cover how to fix this issue.

How to Reset Your Bosch Dishwasher - PartSelect.com

A step-by-step guide to resetting a Bosch dishwasher. Learn what errors and issues a reset can fix, how to do a soft reset, and how to do a hard reset.

How to Fix an F11 Code on a Frigidaire Oven - PartSelect.com

Learn how to clear the F11 error code on your Frigidaire oven and replace the keypad overlay and electronic control board with our easy DIY how-to guide.

 See more articles & guides

Dispenser Door Recess Crank WR17X10706

Official part for General Electric, Hotpoint, Kenmore

★★★★★
★★★★★
(1)

Easy 

30 - 60 mins 

Bestseller
Install video
291908-1-M-GE-WR17X10706 -Dispenser Door Recess Crank
Part Location Diagram of WR17X10706 GE Dispenser Door Recess Crank
See part 67 in the diagram
Replacing your General Electric Refrigerator Dispenser Door Recess Crank
291908-1-S-GE-WR17X10706 -Dispenser Door Recess Crank 360 view
( Grid squares measure 1x1 inch )
291908-1-S-GE-WR17X10706 -Dispenser Door Recess Crank 291908-2-S-GE-WR17X10706 -Dispenser Door Recess Crank 291908-1-S-GE-WR17X10706 -Dispenser Door Recess Crank 360 view
Part Location Diagram of WR17X10706 GE Dispenser Door Recess Crank Replacing your General Electric Refrigerator Dispenser Door Recess Crank
Price Match
OEM badge Official OEM Part
$16.05
In Stock
Order now and your part arrives by Oct 25
 Fits your ESS25LSMABS!

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Dispenser Door Recess Crank Specifications

This crank door recess is supplied directly from the original equipment manufacturer. The plastic part is fastened behind the interface dispenser assembly in the freezer door. Activated by the dispenser solenoid, this part regulates the opening and closing of the ice chute door. A screwdriver is needed for the repair. The crank door recess is sold individually.
Part #WR17X10706
Manufactured by GE for General Electric, Hotpoint, Kenmore

You May Also Need

Because heroes deserve fewer surprise re-installs.

$33.60
In Stock
$56.33
In Stock
$16.10
In Stock
$20.36
Special Order
$22.52
In Stock
$28.42
In Stock
$18.22
In Stock
$31.58
In Stock
Appliance Cleaner – Part Number: 00312207
Appliance Cleaner
Part #00312207
$53.85
Special Order

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

Part Videos

Watch our pros, then fix it yourself.

Replacing your General Electric Refrigerator Dispenser Door Recess Crank

Replacing your General Electric Refrigerator Dispenser Door Recess Crank

About this fix

Common problems and models this part fixes.

Easy 

30 - 60 mins 

Rated by verified customers

What this part fixes:
  • Door Sweating
  • Ice maker won’t dispense ice
  • Door won’t open or close
  • Frost buildup
  • Not dispensing water
  • Leaking
  • Freezer section too warm
  • Ice maker not making ice
Works with the following products:
  • Refrigerator
Part# WR17X10706 replaces these:
AP3185409, 913457

Customer Reviews

Real ratings from other people who bought this part.

Average Rating:

★★★★★
★★★★★
1 Review
5.0

Out of 5

  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0

Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charles H - May 29, 2019
  Verified Purchase
Fridge
Exactly what I needed...worked great and easily installed
  • 1

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Easy 

30 - 60 mins 

Average repair rating from 33 real customers like you

Sort by:
  • 1
  • 2
  • 3

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Ice got stuck at dispenser door
3 of 3 people found this instruction helpful.
  • Brian from ORLANDO, FL
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
I started by finding thw dispenser door part. On the parts diagram it showed all the other parts I might need to replace. Due to the age of the fridge I decided to replace them all, especially the sprIngs. I made sure to watch all of the videos for each part. Although they overlapped, each one showed the repair in more detail. The repair was as shown. If your frosge has been in service like mine for many years, plan on taking thw whole ice chute and dispenser door assembly out for thorough cleaning. One trick I learned is to take pictures as I disassemble so I can refer back for reassembly. When I put it together, the microswitch didn't work. I ordered that part, the only one I missed initially and installed it when it came in. Everything worked well. There was no video for the torsion spring and alignment of the chute and frame is tricky, make sure you take a picture. Part Select should dona video foe that. The putty knife trick for the trim ring was key. It was only shown in one video for an internal part so glad I watched them all.
Read less
Was this helpful?
Thank you for voting!
Frost on the inside of the ice shoot, and the dispenser door recess crank was broken.
1 person found this instruction helpful.
  • Raja from CLARKSBURG, MD
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Used a putty knife to take the frame out .disconnected the power. Disconnected the panel. unscrewed the dispenser door recess crank (only 4 screws) . After that unscrewed the assembly of the flapper It was an easy process after that to install the new parts using a flat head and a
Phillips screw drivers.
Was this helpful?
Thank you for voting!
Frost in upper portion of freezer
1 person found this instruction helpful.
  • Tim from SANTA FE, NM
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Removed escutcheon, removed control panel, remover and replaced flapper, spring and crank. Followed the instruction exactly. Although I hope this fixes the frosting problem, I did not see anything wrong with the parts I removed. I hope this fixes the problem,
Was this helpful?
Thank you for voting!
ice door not closing
2 of 3 people found this instruction helpful.
  • Rick from VACAVILLE, CA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
looked at the video you supplied for repair.. that made it so easy to repair the problem. I felt quite confident in myself after the video.The repair went smoothly and the refridgerator wotks super thank you so much Rick
Was this helpful?
Thank you for voting!
FROST IN FREEZER NO WATER
2 of 2 people found this instruction helpful.
  • Jim from SPANISH FORT, AL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
FOLLOW INSTRUCTIONS OF YOUR VIDEO
Was this helpful?
Thank you for voting!
Ice maker dispenser chute frosting up
0 of 1 people found this instruction helpful.
  • Bill from Venice, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Before starting my repairs I checked for part suppliers online. Partselect was one of the first I saw. They also had instruction videos. After watching the video, I took apart the ice maker and found the solenoid had rusted. I replaced the solenoid and while everything was apart I replaced the crank, spring and the flapper. The entire process only took about 20 minutes and that was only because of their informative videos.
Read less
Was this helpful?
Thank you for voting!
Ice Dispenser wouldn't work.
1 of 3 people found this instruction helpful.
  • Charles from Waterford, MI
  • Easy
  • 15 - 30 mins
  • Screw drivers
I watched the video and armed with that information and a few inexpensive parts replaced the defective solenoid, flapper and crank arm. I'm pretty handy and this was easy! I discovered quite a bit of mildew up and behind the panels and was able to clean those panels completely while they were removed. The screw heads were a little rusted so I made sure to use a new Phillips screw driver with the exact size tip and some moderate finesse to loosen or remove the screws. I will return to Parts Select in the future for any appliance repair parts. Thank you!
Read less
Was this helpful?
Thank you for voting!
ice despenser door would stick open and frost up to the point of of ice not coming out
35 of 47 people found this instruction helpful.
  • joe from raleigh, NC
  • Easy
  • Less than 15 mins
  • Screw drivers
after finding the video describing the same problem, i gave it a shot. Major problem was figuring out how to take outside trim off of the ice/water dispenser. Everything i tried did not work like the videos i had seen. Looking thru some of the posted blogs i found another way to get behind the control panel without even taking off the trim piece. i pressed a 1/8th allen wrench into the two outer holes on the bottom of the control panel which released the panel to pull out from the bottom. after that it was simple to release the three plugs from the circuit board and remove the control panel. 4 phi lips screws later the ice chute comes straight out revealing the flapper door which is held in by 2 more screws. once that assembly is out the solenoid is held by three more screws. there was nothing difficult at all about this repair once the secret was out about the first step about the three holes (use only the outer two) in the bottom of the control panel
Read less
Was this helpful?
Thank you for voting!
Ice Chute Flapper not closing causing water dripping to floor and ice chute freezing up solid
132 of 182 people found this instruction helpful.
  • James from Malabar, FL
  • Easy
  • 30 - 60 mins
  • Screw drivers
I followed the video instructions for replacing the Flapper Valve and solenoid that Part Select suggested. It was one of the best DIY Reapair Sites I've used. Thank you
Was this helpful?
Thank you for voting!
flapper movement both directions
2 of 3 people found this instruction helpful.
  • James from Milford, NH
  • Easy
  • 30 - 60 mins
  • Screw drivers
Replacing was easy. Cleaning took the longest. Order screws with parts, I could not find them at the hardware store. I suggest a coat of oil (3 in one) on the solenoid/piston surfaces. I probably did not have to replace them. The rust was inhibiting the piston movement. Some steel wool and oil would have probably fixed it. If the flap closing starts sounding softer, I'm going to take it apart and clean it first.
Read less
Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3

DIY Questions and Expert Answers

Be the first to ask our experts a question about this part!

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #WR17X10706
Brand
Model Number
Description
General Electric
A4425GDTABB
Refrigerator
General Electric
A4425GDTAWW
Refrigerator
General Electric
A4425GDTBBB
Refrigerator
General Electric
A4425GDTBWW
Refrigerator
General Electric
A4425GDTW
Refrigerator - GE Refrigerator Model A4425GDTW Parts
General Electric
BSS25GFPACC
Refrigerator
General Electric
BSS25GFPAWW
Refrigerator
General Electric
BSS25GFPCCC
Refrigerator
General Electric
BSS25GFPCWW
Refrigerator
General Electric
BSS25GFPDCC
Refrigerator
General Electric
BSS25GFPDWW
Refrigerator
General Electric
BSS25GFPECC
Refrigerator
General Electric
BSS25GFPEWW
Refrigerator
General Electric
BSS25GFPHCC
Refrigerator
General Electric
BSS25GFPHWW
Refrigerator
General Electric
BSS25JFRFWW
Refrigerator
General Electric
BSS25JFRJWW
Refrigerator
General Electric
BSS25JFTAWW
Refrigerator
General Electric
BSS25JFTBWW
Refrigerator - T Series
General Electric
BSS25JFTCWW
Refrigerator - T Series
General Electric
BSS25JFTDWW
Refrigerator
General Electric
BSS25JFTEWW
Refrigerator - T Series
General Electric
BSS25JFTGWW
Refrigerator
General Electric
BSS25JFTHWW
Refrigerator
General Electric
BSS25JFTIWW
Refrigerator
General Electric
BSS25JFTJWW
Refrigerator
General Electric
BSS25JFTNWW
Refrigerator
General Electric
BSS25JFTPWW
Refrigerator
General Electric
BSS25JSRFSS
Refrigerator
General Electric
BSS25JSRJSS
Refrigerator
Dispenser Door Recess Crank
$16.05
In Stock
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.