Oreck Parts

Oreck Brush Roller This Original OEM Wood Brushroll Assembly Includes: wood brushroll, red bristles, ball bearings, metal pulley, firm-fitting removable end caps. To keep your Oreck vacuum cleaner working at peak performance it is recommended to replace the Brushroll once a year.

Oreck Edge Brush, Silver Ion The edge brush is sold individually and is made of plastic. It may require a screwdriver during the installation. Over time this item may break and will need to be replaced. This part is an OEM from Oreck for use in vacuums.

Oreck Wheel Front This is an authentic replacement part manufactured for use with Oreck upright vacuums. The special wheel is used to reduce friction between the front of the base plate and the surface being vacuumed. This wheel is sold as an individual replacement part, please see model diagram for associative parts.

Oreck Disposable Filter Bags P This is an authentic Oreck replacement part. The disposable filter bag is designed by the manufacturer for use in upright vacuums. This part is made of cardboard and paper, and comes in a set of five. It is used to remove dust and debris from the air that flows through the motor. You may require a screwdriver or Allen wrench when replacing this item.

Oreck O-ring

Oreck Exhaust Filter This is an authentic Oreck replacement part. The exhaust filter is designed by the manufacturer for use in an upright vacuum. This part is made of foam, and is placed in the exhaust filter housing in the back of the top cover assembly to remove dust or debris from the air as it passes out of the machine. This item is supplied as an individual replacement part.

Oreck Bumper, Clear Clear bumper with blue tint

Oreck Adjustable Shoulder Strap This is an authentic Oreck replacement part, sourced from the original manufacturer for use with canister vacuums. The special shoulder strap is used to carry the canister while the vacuum is in operation. This strap is available as an individual replacement part, see illustrated part list for related parts.

Oreck Motor Seal This is an authentic Oreck replacement part that has been sourced from the original manufacturer to be used with upright vacuums. The motor seal is used to fill the space between the outside of the motor and the upper cover and brush roll tray. A screwdriver is needed to install this part. The motor seal is sold individually.

Oreck Housing, Red, W/label