ZT740-3010 Kohler Engine - Overview

This authentic manufacturer-sourced gasket kit is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. The parts in this kit are utilized to ensure a tight fit between the cylinder and the cylinder head. Over time gaskets may wear out and begin to crack eventually requiring replacements. For the e...Read morexact locations and the correct installation of the new components, please refer to the appropriate diagrams of your model. This high-quality kit includes the head gasket, the intake port o-rings, the muffler gaskets, the intake manifold gaskets, the head bolt washers, the head bolt nuts and the installation instructions. You will need a wrench set to take the engine apart when performing this repair.

This is a high-quality manufacturer-sourced part which is made for use with Kohler engines commonly installed on lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal for the valve stem. Over time it may become brittle and begin to crack eventually requiring a replacement. For the proper applicatio...Read moren please refer to the appropriate diagrams of your model. This high-quality part is made of durable rubber material and is sold individually. You will need a screwdriver and a wrench set to take the engine apart and perform the repair.

This manufacturer-supplied replacement part is designed for use with Kohler engines commonly installed on lawn and garden equipment. The bushing helps to secure the throttle linkage. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please refer to the appropriate diagrams of your mo...Read moredel for the exact location and the correct installation of this part. Keep in mind this high-quality bushing is made of durable plastic and is sold individually. You will need a wrench set to remove the housing in order to gain access to the bushing.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

Designed to secure parts in place and spread the load, this Flange or Lock Nut is made of durable metal, is silver, is not part of a kit or assembly, and is sold individually. This part has been sourced directly from the original manufacturer. When the threads or ends become damaged or worn, it will no longer be able to hold pieces in p...Read morelace. At which point, it should be replaced. Refer to your owner's manual to determine if this is the correct part, as it is located in various locations on some machines. Customers rate this repair as Easy.

This is an OEM part sourced directly from the manufacturer. The connector is commonly found in Kohler engines. This part is made of high-quality plastic, and is attached to the rectifier regulator to direct the path of wires that carry electrical signals. You may require a wrench when replacing this item. This product is available as an individual replacement part.

This is an authentic OEM component from Kohler. The metal screw is made for use with many lawn and garden engines. Sold individually, this item often helps to secure the closure plate. A wrench is required for the removal and replacement. It is encouraged to purchase spares, as the screw can wear over time.

This part is an OEM from Kohler. The exhaust valve (std.) is composed of high-quality metal, and is compatible with many small engines. This part is fitted into the cylinder head assembly. The charged fuel moves through the exhaust valve to the manifold. This item is sold individually. A wrench is often needed in making the repair.