ZT720-3016 Kohler Engine - Overview

This is a genuine Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The metal screw is used to secure the head to the top of the cylinder assembly. This screw requires a hex ratchet set to install and is priced as a single item.

This is a high-quality manufacturer-sourced part which is made for use with Kohler engines commonly installed on lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal for the valve stem. Over time it may become brittle and begin to crack eventually requiring a replacement. For the proper applicatio...Read moren please refer to the appropriate diagrams of your model. This high-quality part is made of durable rubber material and is sold individually. You will need a screwdriver and a wrench set to take the engine apart and perform the repair.

This manufacturer-supplied replacement part is designed for use with Kohler engines commonly installed on lawn and garden equipment. The bushing helps to secure the throttle linkage. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please refer to the appropriate diagrams of your mo...Read moredel for the exact location and the correct installation of this part. Keep in mind this high-quality bushing is made of durable plastic and is sold individually. You will need a wrench set to remove the housing in order to gain access to the bushing.

This primary air filter element in your lawn equipment filters the air that enters the engine for combustion. It is a cylindrical-shaped filter made of pleated paper and is typically located within the air cleaner housing secured by an end cap. The filter element has an inner safety element that provides an extra layer of protection. It m...Read moreeasures 10 1/2 inches in length with an outer diameter of 4 1/8 inches and an inner diameter of 2 1/2 inches. To determine if the filter element needs to be replaced check for visible signs of damage or excessive dirt buildup. A damaged or clogged element restricts airflow and allows dirt and debris to enter the engine resulting in reduced performance. To replace the filter element unhook the retaining clips and detach the end caps of your air cleaner housing from the machine. Remove the old element from the housing and insert the new one. Refer to your user manual for any specific installation instructions. Please note that this OEM-sourced filter element is sold individually and separately from the safety air filter element.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

This is an authentic replacement part manufactured for use with Kohler small engines. The valve springs are used to compress when the valve is open and extend to close the valve. The intake and exhaust valves use this spring, and it is sold individually.

Designed to secure parts in place and spread the load, this Flange or Lock Nut is made of durable metal, is silver, is not part of a kit or assembly, and is sold individually. This part has been sourced directly from the original manufacturer. When the threads or ends become damaged or worn, it will no longer be able to hold pieces in p...Read morelace. At which point, it should be replaced. Refer to your owner's manual to determine if this is the correct part, as it is located in various locations on some machines. Customers rate this repair as Easy.

In-line fuel filter