ZICS360NXBLH General Electric Refrigerator - Overview

If you notice that your refrigerator or freezer is noisy or too warm, you may need to replace the evaporator fan grommet. This part is red in color, and is about 1 inch in diameter. The evaporator fan grommet is located behind the evaporator fan cover in the back of the freezer. You will need to remove the evaporator fan cover to access t...Read morehe evaporator fan and complete this repair. Before you begin this repair, ensure the power to the refrigerator is disconnected. You will need a pair of needle nose pliers, a small flat blade screw driver and both a 1/4 and 5/16-inch nut driver to complete this repair.

This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.

The water inlet valve on your refrigerator allows water to enter the ice maker and water dispenser. If your ice maker or water dispenser is not functioning properly, or you notice a leak, you may need to replace the single outlet valve. This single outlet valve has 1/4-inch compressions fittings and is intended for use with refrigerators ...Read morethat make crescent-shaped ice cubes. As per the manufacturer, this valve has a new quick connection. You must cut the retaining nut off your current plastic water line, and gently push it into the new valve. Be sure to disconnect the water and power sources from the refrigerator before you begin this repair.

This DC fan motor moves air across the condenser coils and compressor to help remove heat. A failed motor may cause poor cooling, a hot compressor, or humming and squealing sounds. Before replacing it, clean the coils and check the fan blade, wiring, and air path for dirt or damage. Confirm fit with the full appliance model, 4-pin plug, a...Read morend 11.3- to 12-volt rating. Unplug the refrigerator before removing the rear panel. Keep hands away from the blade, protect the cooling lines, and reinstall the panel before testing the unit.

This is the replacement vegetable pan lid for your refrigerator. It is made of clear and white plastic and measures approximately 15 inches by 7 inches. The vegetable pan lid is found at the top of the vegetable pan and protects the contents of the pan. The clear portion in the middle of the lid allows you to see the inside of the pan and...Read more its contents. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Size: 10-32 GXTT FLP .595 Sold individually.

This plastic door bin is designed to attach securely to the inside of your refrigerator door, providing convenient storage for bottles, jars, and other small items. Its adjustable placement allows you to customize your storage space as needed. The bin features a white base with a clear exterior and measures approximately 16 inches wide, 5...Read more inches high, and 5.5 inches deep. If the bin is cracked or the mounting tabs are broken, replacing it will restore proper function. This part is sold individually.

If your fridge isn’t cooling properly or seems to be running too loud or too often, the inverter control board might be the issue. This part controls how fast the compressor runs, helping your fridge stay at the right temperature while using less energy. It comes with jumper wires and instructions to make installation easier. Swapping out a bad board can help your fridge run more efficiently and quietly.

If your freezer drawer isn’t sealing right, this gasket could be the fix. It helps keep cold air in and warm air out, preventing frost and keeping food fresh. Made to fit GE bottom freezer models, it’s flexible, durable, and easy to install—just pop out the old one and press in the new.

Bottles that lean or a shelf that rattles may indicate a damaged right-hand door bin. The deep bin adds storage inside the refrigerator door for jars, drinks, and other upright containers. Check whether the bin itself is cracked or whether the mounting slots in the door liner are broken. Verify fit with the full appliance model before ord...Read moreering, since left- and right-side bins are not always interchangeable. Remove all stored items before lifting the old bin free. Clean the mounting area with mild soap and dry it fully. Set the replacement tabs into their matching slots, lower the bin evenly, and give it a gentle pull to confirm that it is secure before loading it.

A door bin that sags, rattles, or falls from the refrigerator door may have broken tabs. This clear, deep bin holds bottles, jars, and small food containers inside the fresh food section. First check whether the damage is on the bin or on the door itself. A new bin will not stay in place if the door slots are cracked. Use the full applian...Read morece model number to check the size and mounting shape. Remove all food before taking out the old bin. Clean the mounting area, place the new bin over the supports, and press it down gently. Test the fit before loading it, and keep very heavy items on a shelf.