ZICP360SLESS General Electric Refrigerator - Parts

If your fridge isn’t cooling properly or seems to be running too loud or too often, the inverter control board might be the issue. This part controls how fast the compressor runs, helping your fridge stay at the right temperature while using less energy. It comes with jumper wires and instructions to make installation easier. Swapping out a bad board can help your fridge run more efficiently and quietly.

If your freezer drawer isn’t sealing right, this gasket could be the fix. It helps keep cold air in and warm air out, preventing frost and keeping food fresh. Made to fit GE bottom freezer models, it’s flexible, durable, and easy to install—just pop out the old one and press in the new.

Can be used with the evaporator or condenser fan motor.

Bottles that lean or a shelf that rattles may indicate a damaged right-hand door bin. The deep bin adds storage inside the refrigerator door for jars, drinks, and other upright containers. Check whether the bin itself is cracked or whether the mounting slots in the door liner are broken. Verify fit with the full appliance model before ord...Read moreering, since left- and right-side bins are not always interchangeable. Remove all stored items before lifting the old bin free. Clean the mounting area with mild soap and dry it fully. Set the replacement tabs into their matching slots, lower the bin evenly, and give it a gentle pull to confirm that it is secure before loading it.

A door bin that sags, rattles, or falls from the refrigerator door may have broken tabs. This clear, deep bin holds bottles, jars, and small food containers inside the fresh food section. First check whether the damage is on the bin or on the door itself. A new bin will not stay in place if the door slots are cracked. Use the full applian...Read morece model number to check the size and mounting shape. Remove all food before taking out the old bin. Clean the mounting area, place the new bin over the supports, and press it down gently. Test the fit before loading it, and keep very heavy items on a shelf.

Sold individually.

This water line 1/4, also known as a ice maker fill tube, is used in freezers and refrigerators. The tube directs the water into the ice maker cup during the cycle in which it fills the cup. The water line height is 0.6 inch and it weighs 0.1 lbs. As a safety precaution, unplug your appliance from the power source before installing this p...Read moreart. Remember to safely store food when it is removed from fridge or freezer. Refer to the installation instructions provided by the manufacturer for further guidance and accuracy.