Models > ZDIS15CSSM

ZDIS15CSSM Whirlpool Ice Maker - Overview

Sections of the ZDIS15CSSM

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Condenser Fan Motor Kit – Part Number: W10124096
Condenser Fan Motor Kit
★★★★★
★★★★★
(44)
PartSelect #: PS1957416
Manufacturer #: W10124096
This condenser fan motor kit includes a motor, fan blade, wire harness, and screws. Used in a refrigerator, the condenser fan motor moves the condenser fan blade to direct and move air across the cond...
$127.42
  In Stock
Affresh Ice Machine Cleaner – Part Number: W11179302
Affresh Ice Machine Cleaner
★★★★★
★★★★★
(3)
PartSelect #: PS12583750
Manufacturer #: W11179302
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machi...
$20.50
  In Stock
Water Tube Kit – Part Number: W10823511
Water Tube Kit
★★★★★
★★★★★
(7)
PartSelect #: PS11730901
Manufacturer #: W10823511
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may...
$36.02
  In Stock
Thermistor – Part Number: WPW10503764
Thermistor
★★★★★
★★★★★
(11)
PartSelect #: PS11755741
Manufacturer #: WPW10503764
This is a bin thermostat made for standalone ice makers to activate the ice maker shut-off when bin is full. It senses how much ice is in the bin to determine if it should produce more ice or activate...
$75.55
  In Stock
Door Light Switch – Part Number: WP2149705
Door Light Switch
★★★★★
★★★★★
(14)
PartSelect #: PS11738900
Manufacturer #: WP2149705
The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the door, the contacts ins...
$30.31
  In Stock
Ice Cutting Grid Wire – Part Number: 4387020
Ice Cutting Grid Wire
★★★★★
★★★★★
(6)
PartSelect #: PS370853
Manufacturer #: 4387020
There is approximately 10' of wire. Note: 2 kits are needed to replace both directions.
$60.67
  In Stock
Ice Cutter Grid Complete Assembly – Part Number: WP2313637
Ice Cutter Grid Complete Assembly
★★★★★
★★★★★
(10)
PartSelect #: PS11740334
Manufacturer #: WP2313637
If your freestanding ice maker is not producing ice properly, the ice cutter grid assembly may need replacing. The cutter grid is located within the main unit of the ice maker and contains thin, heate...
$185.78
  In Stock
Circulation Pump with Motor – Part Number: WP2217220
Circulation Pump with Motor
★★★★★
★★★★★
(3)
PartSelect #: PS11739740
Manufacturer #: WP2217220
The circulation pump assembly, used in a free-standing ice maker, delivers water from the water tank over the top of the evaporator plate. It does this to form the ice that drops onto the cutting grid...
$467.09
  In Stock
Screw – Part Number: WP8281196
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11745622
Manufacturer #: WP8281196
Sold individually.
$11.09
  In Stock
Drain Fastener Cap – Part Number: WP2185696
Drain Fastener Cap
★★★★★
★★★★★
(4)
PartSelect #: PS11739077
Manufacturer #: WP2185696
This is a drain fastener cap and is used in conjunction with your freezer/refrigerator. This model is almost 1.5 inches in diameter, half an inch thick, and is white in color. This piece will fasten t...
$20.92
  In Stock
Screw – Part Number: WP999367
Screw
PartSelect #: PS11747799
Manufacturer #: WP999367
Sold individually.
$7.95
  In Stock
Ice Maker Water Distributor Tube – Part Number: W10863947
Ice Maker Water Distributor Tube
★★★★★
★★★★★
(1)
PartSelect #: PS11738017
Manufacturer #: W10863947
The water distributor tube distributes water from the reservoir to the evaporator plate.
$49.65
  In Stock

Questions And Answers for ZDIS15CSSM

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the ZDIS15CSSM

[Viewing 11 of 11]
Noisy
Fixed by
these parts
Fixing Fixing
Show All
Light not working
Fixed by
these parts
Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge too warm
Fixed by
these parts
Fixing
Show All
Freezer section too warm
Fixed by
these parts
Fixing
Show All
Ice maker not making ice
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Fridge and Freezer are too warm
Fixed by
these parts
Fixing
Show All
Fridge runs too long
Fixed by
these parts
Fixing
Show All
Clicking sound
Fixed by
these parts
Fixing
Show All
Not dispensing water
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Seven year old condenser fan was making noise when it was running.
The process to repair was very simple, I removed the back of the refrigerator to expose the motor area. I then removed three screws that held the condenser motor in place. once it was loose I detactched the electrical harness and removed the old motor. I then placed the new motor in place and secured it with the screws and reattached the new electrical harness that came with the new part. Once completed I reviewed it to make sure I didn't miss anything. I then replaced the cover over the motor area and enjoyed my success in repairing my own appliance with no added cost for labor, which would have been expensive I'm sure. The part purchased came with clear and consice instructions very easy to follow.
Parts Used:
Condenser Fan Motor Kit
  • Josue from Jacksonville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
199 of 210 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lack of frequent cleaning resulted in pump failure due to buildup from hard water mineral deposists
This ice maker is really a Kitchenaid appliance.

1. Remove all ice and drain water pan by removing drain cap.
2. Disconnect waterline and unplug ice maker
3. Set icemaker on a work bench unless you like working on your knees, head down.
4. Remove flip out chute and ice scoop bracket.
5. Remove water pan by removing thumb screws
6. Remove single 1/4" head cap screw that holds plastic cover over pump.
7. Remove discharge hose from pump. Pull clear plastic 1/8" diameter water supply line from notch in left edge of pump base.
8. Remove three cap screws holding pump. Two are visible. The third one is behind the pump and requires an 8" extension on the socket.
9. After the three screws are removed the pump drops down. The electric connection must be unplugged. Pinch the tabs on either side to release the plug.
10. Reverse procedure to install new pump. Unless you have really small hands or love being frustrated, don't bother to reinstall the third screw that is behind the pump. The pump stays in place just fine without that screw.
11. After reinstalling the icemaker, clean thoroughly by washing all inside surfaces with a strong bleach solution.
12. Run a cleaning cycle with one quart of strong bleach solution in the water tray. At the conclusion of the cleaning cycle, drain the water tray. Place unit into service. DON'T FORGET TO CLEAN REGULARLY. If the water supply is not chlorinated molds and algae will develop in recirculation hose.
Parts Used:
Circulation Pump with Motor
  • Louis from Cheyenne, WY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
77 of 81 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken light switch
Took all the screws out of the plastic shroud that encloses the switch .There only four that I needed to remove, were the two in front where the switches that go,they go in horizontally and two in the back with large washers on them that hold the back to the top of the box that go in vertically.The switch was a snap ( make that two snaps ) the wiring is almost self explanatory. then it gos back to the way you took it off. OH! and don't forget to turn the light bulb all the way back in to the socket , so the light will work after you take the time to install it yourself.I had the water supply line from under the box to the water dispenser in the door and the total bill on that was one hundred thirty seven and a hand full of change.Don't be afraid to do it yourself the savings is enough on one one item to make several months payments on a new one Randy the "Handy Man'
Parts Used:
Door Light Switch
  • Randy from Hays, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
77 of 128 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!