Models
>
ZCGS150PSS-00
ZCGS150PSS-00 General Electric Trash Compactor - Overview
Sections of the ZCGS150PSS-00
[Viewing 6 of 6]Manuals & Care Guides for ZCGS150PSS-00
Click to downloadInstall
Installation Instructions
(1.97MB)
Specs
Product Specifications Sheet
(0.18MB)
Care
Use and Care Manual
(1.89MB)
Keep searches simple, eg. "belt" or "pump".
Compactor Bags - Package of 12
PartSelect #: PS258002
Manufacturer #: WC60X5017
Using trash compactor bags is a practical way to remove your waste. Because compactors use such high pressure to compress the waste, using compactor bags designed to handle the force are a necessity. ...
$90.12
In Stock
Power Nut Kit
PartSelect #: PS11747554
Manufacturer #: WP9870163
Includes everything pictured above.
$75.08
In Stock
Drive Gear Kit
PartSelect #: PS257882
Manufacturer #: WC36X5071
The drive gear is located at the bottom of your compactor and helps the drive motor power the ram by operating the chain that powers the compacting ram. If you notice that your drive gear is broken or...
No Longer Available
Bag Carrier
PartSelect #: PS257772
Manufacturer #: WC36X10015
This part holds the trash compactor bag to make taking out the trash without worrying about tearing the bag.
* This part also comes with the 2 handles.
No Longer Available
Questions And Answers for ZCGS150PSS-00
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the ZCGS150PSS-00
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
trash compactor ram not moving - broken plastic drive gear
1) pulled the compactor from under the counter and unplugged it. 2) tipped it on its side 3) removed 5 screws (3 on the motor side and two on the bottom) an took off the bottom cover plate. 3) using the pliers i pulled of the retainer clip from the large drive gear(it had broken on only the hub remain attached) 4) i then just slid in the
... Read more
new gear, snapped in the retainer clip and buttoned up the cover plate. Note I did not replace the other parts that came in the package because the existing ones seemed ok.
Read less
Parts Used:
-
william from andover, MA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
16 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
locking nut was stripped
After calling a repair man and being told my appliance was to old for him to repair I discovered your website. I simply entered the model number and a picture of the part I was looking for was easily found. I ordered online and received the replacement parts 5 day's later. I simply swapped out the old locking nuts with the new ones from
... Read more
your website and the repair was complete. What could have been an easy $100 repair cost a fraction of that and the trash compactor is working just fine.
Read less
Parts Used:
-
Tim from Bigfork, MT
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
12 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the nuts on the ram stripped out
1)Pulled the unit out remove the top and bottom covers. 2)Disconnected the drive chain by removing the sproket from the motor. 3)Unscrewed the drive rod on the side that worked and removed the ram. 4)Reassembled and used the bin for trash while waiting for the part. 5)The nut came with clips included (this was not noted in the order but i
... Read more
s vital) removed the stripped nut by breaking the old clips. 6)Installed the new nut, clips on the ram. 7)Installed the ram onto both drive screws. I had to hold the 'top sensor' switch up to reverse the screws to lower the ram. 8)Rinstalled the top and the appliance. 2 thru 4 dealing witht the chain, sproket and screw were fairly complicated operations.
Read less
Parts Used:
-
kelton from weatherford, TX
-
Difficulty Level:Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!