Quick Question!

Have you ever purchased from PartSelect.com before?

Models > YWMH1162XVS4

YWMH1162XVS4 Whirlpool Microwave - Overview

Get Parts and Repair Help for YWMH1162XVS4

If you know the microwave repair part you need, you can browse the list of all parts on the YWMH1162XVS4, or you can search by name or part description. You can also find your part by where it is located on the YWMH1162XVS4 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for YWMH1162XVS4 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for YWMH1162XVS4

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.19

Light Bulb - 40W

This exterior light bulb for your microwave is 40W and has a small screw-in base. To access the exterior light bulb, you will need to remove the panel on the bottom of the microwav...

$8.83

Charcoal Filter

The charcoal filter in your microwave is designed to improve air circulation and eliminate odors while cooking. If the exhaust fan on your microwave is not working, you may need to replace your charcoal filter. This charcoal filter is located within the intake grille of your microwave, which will need to be unscrewed and opened to gain access to the filter. The manufacturer recommends that you change your charcoal filter every six months. This filter measures 5 inches by 5.375 inches by 0.375 inches. Be sure to measure your current filter to assure correct replacement. This product is sold individually.

$8.86

Grease Filter

This is a grease filter and the purpose of this part is to be used in conjunction with your ventilation system. Your grease filter will trap grease and help eliminate odors from th...

$3.42

Light Bulb - 40W

The 40W lightbulb is found in the interior of your microwave, which will need to be replaced if you have noticed the light is no longer coming on after opening the door. The light bulb is clear in color and made of glass. For this installation, you will need a Phillips screw driver and utility knife. Before beginning, make sure to disconnect the power and wait a few minutes. Remove the two screws in the grove vent and set aside and then lift the grill vent forward and pull up to remove. The light bulb should be underneath a panel and may require the use of your utility knife to remove the silicone holding it in place. Line the new bulb up with the socket and screw into place until it is snug.

$46.40

Glass Cooking Tray

This a genuine OEM microwave cooking tray. It is also known as a microwave turntable or microwave plate. The function of the tray is to hold and rotate food items while the applian...

$28.28

Vent Grille - Black

This part mounts on the top of the microwave above the door.

$8.99

RING TURN

This support ring sits underneath the glass turntable tray.

$6.67

Straight Mounting Bracket

Bracket only.

$18.61

Diode

This diode, or high voltage diode, is used in microwaves. It is an electrical current control device that ensures power flows in one direction and not the other way. If your microw...

$8.73

Fuse

If your microwave is not turning on it could be due to your fuse needing to be replaced. This part protects the microwave by shutting it off if there is an electrical surge. This fuse is just over an inch long, is metallic on both ends and ceramic in the middle. Before beginning this repair, unplug the appliance and wait a few minutes before starting. Remove the outer cabinet which is held in place with two screws. You will then locate the power cord which will lead you to the fuse holder. Determine if the fuse has blown. Using an ohmmeter, you should be able to figure out if it has blown. A proper reading is zero ohms, if it reads as anything else then your fuse has in fact blown. Simply snap the old fuse out of place and place the new one in.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Mounting brackets are fragile and plastic support is easily broken

  • Customer: Richard from San Antonio, TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 567 of 770 people found this instruction helpful
Replaced the intake grille. The grille should be removed prior to cleaning. The entire part is plastic and easily broken so that the two tabs for the mounting screws are shattered and will not hold the part in place. If one attempts to clean the grille using only a moderate amount of pressure with a cloth the fragile plastic will break. The part is poorl... read more

broken glass turntable

  • Customer: Deborah from Baltimore, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 388 of 392 people found this instruction helpful
No repair- just replaced glass turntable.
Right part I needed with first try read more

top plastic grill discolored

  • Customer: RUSSELL from RICHMOND HTS, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 320 of 509 people found this instruction helpful
removed old grill with screwdriver and added new one read more