My Orders
- Home
- YRMF3100SW-2
- Instructions
YRMF3100SW-2 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken oven door handle. Needed the brackets and screws to repair it.
-
Margaret from Cogan Station, PA
- Really Easy
- More than 2 hours
-
Screw drivers
removed the broken parts and screwed on the new parts.
Was this helpful?
Thank you for voting!
plastic sockets in end caps for connection screws broke off
-
cornelius from Hollister, CA
- A Bit Difficult
- More than 2 hours
-
Pliers, Screw drivers, Socket set
Very detailed repair instructions on internet made installation of new end caps a job not needing a professioal.
Was this helpful?
Thank you for voting!
End cap plastic broke at screw entry
-
Alan from Mars, PA
- Easy
- 30 - 60 mins
-
Screw drivers, Socket set
Removed door from oven. Removed all side screws and pulled front assembly from door. Discarded old screws and broken plastic pieces. Put old handle in new end caps and lined them up with screw entry holes. It took 2 people to hold the door up while pressing in the screws to enter the new plastic receivers on the end caps. A pretty eas
... Read more
y fix.
Read less
Was this helpful?
Thank you for voting!
Broken door handle
-
John from Milan, TN
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Pull door from oven and place on flat work surface. Remove bottom screws then the top screws and separate the two halves of the door . Remove broken door handles and replace reassemble door and place back on oven. The hardest thing was to clean the grease out of the inside of the door and get the glass clean to reassemble the door.
Was this helpful?
Thank you for voting!