YRED4340SQ2 Roper Dryer Parts & Repair Help | PartSelect
Models > YRED4340SQ2
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(301)
PartSelect #:PS11741460
Manufacturer #:WP3392519
This thermal fuse is used in dryers as a safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats. This replacement part features two 3/16 in...
$15.05
In Stock
(289)
PartSelect #:PS346995
Manufacturer #:341241
This multi rib belt is an important part in your dryer, it is what helps rotate the drum. The belt attaches to the drum, idler pulley, and motor pulley. As the armature of the moto...
$16.80
On Order
(78)
PartSelect #:PS11741405
Manufacturer #:WP3387134
A cycling thermostat is in tune with the temperature of your dryer and regulates it in order to maintain a certain temperature. This thermostat reaches a temperature of 155 degrees...
$17.73
In Stock
(93)
PartSelect #:PS334299
Manufacturer #:279816
The thermal cut-off turns off the heating component when the dryer overheats, ensuring there is a consistent level of heat at all times. This dryer thermal cut-off kit includes one...
$41.96
On Order
(82)
PartSelect #:PS334230
Manufacturer #:279570
This is a door catch kit, and it is designed for use with your dryer. On your appliance you will find both a strike and a catch. These two parts work together to keep your dryer do...
$4.92
In Stock
(118)
PartSelect #:PS373087
Manufacturer #:4392065
This maintenance kit or dry repair kit is used for dryers. The kit includes the drum belt, drum support rollers, one idler pulley, four tri-rings, and one clip. If your dryer is ma...
$48.04
On Order
(78)
PartSelect #:PS347627
Manufacturer #:349241T
The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The kit includes two drum rollers, four tri-rings, and one palnut (or retaining was...
$20.72
On Order
(21)
PartSelect #:PS11742185
Manufacturer #:WP3977767
This high-limit thermostat with Terminal Extension Arm acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Fahrenheit,...
$16.44
In Stock
(17)
PartSelect #:PS11743765
Manufacturer #:WP691366
This part provides the tension required for a multi-ribbed belt. It also helps the belt rotate the drum and attaches to the idler pulley wheel. If your dryer will not start or tumb...
$16.92
On Order
(5)
PartSelect #:PS11755850
Manufacturer #:WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found b...
$10.20
In Stock
Questions and Answers for YRED4340SQ2
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dryer was working, but no heat.

Dryer Thermal Fuse – Part Number: WP3392519
  • Customer: ANTHONY from CHESHIRE, CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 2549 of 2849 people found this instruction helpful
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils.
Not knowing what the problem was I started looking at the coils and could not see any broken parts.
So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, ... read more

Dryer tub belt broke

  • Customer: Ray from Denton, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 1077 of 1146 people found this instruction helpful
Removed the two screws that attatch the lent channel to the top of the dryer, then lifted the top of the dryer by pushing in on the two locking tabs located at the front , left and right , corners of the dryer top with a small flat head screw driver. The top of the dryer will fold back out of the way. At this point I removed the two 1/4 inch screws that are ... read more

No Heat

Thermal Cut-Off Kit – Part Number: 279816
  • Customer: Vernon from Niceville, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 858 of 910 people found this instruction helpful
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back off. read more