Y4800EC (41CD480C800) Yard Machines Edger - Overview

This is an authentic manufacturer-sourced component which is specially designed for Craftsman trimmers. Its purpose is to filter out dust and debris from contaminating the carburetor and engine, unfortunately, over time it will wear out and may get clogged eventually requiring a replacement to maintain peak performance. When replacing the...Read more filter you can open the package in comes in and put a bit of two cycle oil in the bag and let it absorb into the filter. Then remove it from the bag and squeeze it with a paper towel to remove the excess oil. Keep in mind this high-quality foam filter is sold individually. Please make sure to refer to the owners manual for the correct location and application of this component.

This is a genuine anti-rotation screw from the Ryobi manufacturer. The metal screw is compatible with many lawn and garden trimmers. This item works to help secure the clutch cover assembly. This part is sold individually. A screwdriver is needed in making the repair.

This is a genuine manufacturer approved replacement drive shaft that is designed for string trimmers. Flexible drive shaft fits inside the drive shaft housing to spin the cutting head. It is made out of metal and it is sold individually. To complete this repair you would need a screwdriver and pliers. Removing the Drive Shaft: • Loos...Read moreen the shaft screws. • Remove the air filter. • Remove the throttle cable. • Remove the ignition wires. • Remove the shaft housing. • Remove the drive shaft. Installing the New Drive Shaft: • Lubricate the drive shaft. • Install the new drive shaft. • Re-install the shaft housing. • Re-install the throttle cable and ignition wires. • Re-install the air filter assembly.

This is a genuine replacement part from original manufacturer. It is compatible with Ryobi, MTD, Troy-Bilt, Yard Man, and Bolens machines. It\\\'s used with a variety of power tools including trimmers, tillers, and blowers. O-rings create a seal between solid parts, retaining pressure. Because many machines use more than one type of O-rin...Read moreg, use care to ensure that the right one is being used in the right spot. This ring is sold individually.

This is a genuine manufacturer approved replacement throttle cable designed for use with handheld gas string trimmers. Throttle cable is connected to the carburetor and it stops the engine when you shift the lever to the full choke position. This assembly consists of a metal throttle cable and a plastic housing. Please note the trigger and screws for the housing are sold separately.

This is a genuine replacement part is designed for use with handheld trimmers. It is sourced from original manufacturer and it is sold individually. This split boom coupler includes metal coupler, knob and screws needed to fasten the upper shaft housing to the lower boom assembly. To complete this repair you would need a phillips head screwdriver.

This is a replacement part sourced directly from the manufacturer for Craftsman trimmers and edgers. The fuel cap prevents fuel from spilling out of the fuel tank by covering the opening on the fuel tank. To install the fuel cap requires no tools, simply twits it into place. This part is made of plastic and is sold individually.

Enhance the performance and longevity of your Troy-Bilt equipment with our original Gearbox Assembly. Designed with the highest standards of quality and efficiency in mind, this assembly helps to ensure the proficient operation of your equipment to complete tasks with ease. It is known for its durability and reliability, offering continue...Read mored service for long-term use. Made specifically for Troy-Bilt machines, the precise fit and function provide superior performance. This essential component is an indispensable part of maintaining the optimal operation of your Troy-Bilt equipment. Trust in the enduring quality of our Gearbox Assembly to keep your machine running at its peak.

This genuine OEM throttle trigger allows you to control the engine speed of your trimmer by squeezing or releasing it, which engages the throttle cable. It is conveniently located on the handle assembly for easy access during operation. If you experience stickiness, looseness, or unresponsiveness, the throttle trigger is faulty and requir...Read morees replacement. A malfunctioning throttle trigger makes it difficult to control the engine speed, leading to challenges in starting the trimmer, maintaining a consistent speed, or adjusting power as needed. To replace the throttle trigger, you will need a screwdriver with a Torx bit. First, remove the fasteners holding the throttle housing, then separate the two halves of the housing. Disconnect the lever from the throttle cable and remove it, along with the spring, from your trimmer. Please note that the throttle trigger is sold separately from the throttle cable and spring.

This is a genuine manufacturer sourced replacement part designed for use with handheld lawn and garden equipment. It is utilized to create an air-tight seal between the carburetor and the insulator. Over time seals tend to become brittle and compressed eventually requiring replacement. This part is made from durable composite material and it is sold individually.