XT800-1024 Kohler Engine - Overview

This Spark Plug is a genuine OEM sourced replacement part for various small engines. It is white and silver, made of metal and ceramic components, and sold individually. The Spark Plug ignites the air-fuel mixture inside the combustion chamber. Before replacing, you can attempt to clean the spark plug with fine sandpaper of around 180 g...Read morerit, followed by spraying it with carburetor cleaner and wiping it dry. If this does not resolve your issue, it will need to be replaced. Ensure you gap and torque it to the manufacturer specifications. To complete this repair, you will need a spark plug socket, a socket set, and a torque wrench. Customers rate this repair as Easy.

This is an authentic Kohler replacement part that is manufactured for use with small engines. The stud is used to support the housing for the starter recoil assembly. These studs are sold as individual replacement parts.

This is a genuine replacement part sourced directly from the manufacturer. The fuel hose is commonly found in Kohler engines. This part is made of flexible rubber, and is used to carry fuel. You may require pliers when replacing this item. The fuel hose is sold as an individual replacement part.

This is a genuine manufacturer-supplied tube assembly oil fill that is specially made for use with Kohler engines that are commonly installed on a variety of lawn and garden equipment. It is utilized to refill the oil in the cylinder assembly and to hold the dipstick for checking the oil level. It is a high-quality replacement for a damag...Read moreed or a missing part that was installed on a new unit. Check the diagrams for your model to ensure the proper repair procedure. Note, it is made of durable plastic and is sold as an individual item.

This is an authentic part from Kohler for use in engines. The oil seal fits between the flat washer and the clip governor shaft. If this item becomes broken it will need to be replaced and may require a set of pliers during the installation. This is available as an individual replacement part and is made of plastic and rubber.

This is an authentic manufacturer-sourced component that is specially manufactured for use with Kohler engines commonly installed on lawn and garden equipment. The stud is utilized to support the housing for the starter recoil assembly, please make sure to refer to the appropriate diagrams of your model for the correct location and applic...Read moreation of this part. Keep in mind this high-quality hardware is made of durable metal and is sold individually.

This replacement air cleaner element is specially designed for use with small gas powered engines on lawn and garden equipment. It is supplied directly from original equipment manufacturer. Its purpose is to filter out dust and debris from contaminating the carburetor and the engine. This is a pleated paper filter that is sold individuall...Read morey. Please note, the pre-filter is sold separately. To replace this filter no special tools are needed. Simply remove the cover and replace the filter element.

The base cover goes between the air cleaner element and the base. This is a genuine Kohler and Husqvarna part sourced directly from the manufacturer for use in engines. This item is available as an individual replacement part and is made of plastic. When replacing this item a wrench may be needed. Over time this item may break and will need to be replaced.