XT775-3024 Kohler Engine - Overview

This genuine OEM oil filter helps to remove harmful contaminants from engine oil. It is designed for a variety of Engines. It is sold Individually. This part maintains optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace an Oil Filter at least once a season.

This oil seal is a genuine OEM replacement part designed for lawn and garden equipment. It is a small, circular rubber seal with a diameter of 2 3/8 inches, used to prevent oil leakage between the gear cover and gear shaft, and prevent the entry of contaminants. You will need to replace this oil seal if it is brittle, cracked, or has lost...Read more elasticity. A faulty seal will cause the gears to lose lubrication, increase friction damage, and prematurely wear down the parts. Remember to drain the oil from your equipment before beginning any repairs. Carefully pry the old seal from its mounting position and clear off any debris and residue on the area. Place the new seal in position and ensure it is securely fitted.

Made of durable black rubber, this Oil Seal is an authentic OEM part for use in over 150 models of small engines. This part is sold individually, not as part of a kit or assembly. It will be found on the crankcase opening, where the crankshaft is. The Seal should be replaced when it becomes worn or damaged. When it malfunctions, you'll s...Read moreee oil visibly leaking. To complete this repair, you will need a screwdriver, pliers, a socket set, a wrench set, a nut driver, and an impact wrench. Customers rated the difficulty of this repair as Expert.

This Spark Plug is a genuine OEM sourced replacement part for various small engines. It is white and silver, made of metal and ceramic components, and sold individually. The Spark Plug ignites the air-fuel mixture inside the combustion chamber. Before replacing, you can attempt to clean the spark plug with fine sandpaper of around 180 g...Read morerit, followed by spraying it with carburetor cleaner and wiping it dry. If this does not resolve your issue, it will need to be replaced. Ensure you gap and torque it to the manufacturer specifications. To complete this repair, you will need a spark plug socket, a socket set, and a torque wrench. Customers rate this repair as Easy.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

This oil pressure switch is designed for small gas engines to monitor lubrication levels and help protect the engine from damage caused by low oil pressure. Operating on a 12-volt system, it plays a key role in triggering warnings or engine shutdown when pressure drops below safe levels. Built for dependable performance, it’s a practical replacement for maintaining proper engine protection and reliable operation.

This is an authentic OEM component from Kohler. The metal screw is made for use with many lawn and garden engines. Sold individually, this item often helps to secure the closure plate. A wrench is required for the removal and replacement. It is encouraged to purchase spares, as the screw can wear over time.

Used to supply support for the Governer Gear, this Governer Gear Shaft is an authentic item supplied by the original manufacturer. The Shaft is made of silver-colored metal and is sold individually, not as part of a kit or assembly. This part needs to be replaced when it shows signs of damage, wear, or it can no longer support the Governor Gear. Customers rated this repair as Medium difficulty.

Sold individually, not as part of a kit or assembly, this Govener Pin is a direct replacement part on over 150 models of small engines. The Govener Pin attaches to the Govener Gear. Over time, it may become damaged or worn and need to be replaced. You may need pliers to complete this repair. Customers rate this repair as Easy.

This governor gear and pin kit is designed to help regulate engine speed by controlling RPM for smooth, stable operation. Made from durable materials, it plays a key role in maintaining consistent performance and preventing over-revving under load. Ideal for engine repair or maintenance, it helps restore proper speed control and reliable operation when worn or damaged governor components need replacement.