XT775-3019 Kohler Engine - Overview

Kohler Original Equipment 52 050 02-S Pro Performance Oil Filter. For optimum performance, we recommend changing the oil in your small engine after the first five hours of use. After that, change the oil on a yearly basis or after every 50 hours of use (whichever comes first).

Made of durable black rubber, this Oil Seal is an authentic OEM part for use in over 150 models of small engines. This part is sold individually, not as part of a kit or assembly. It will be found on the crankcase opening, where the crankshaft is. The Seal should be replaced when it becomes worn or damaged. When it malfunctions, you'll s...Read moreee oil visibly leaking. To complete this repair, you will need a screwdriver, pliers, a socket set, a wrench set, a nut driver, and an impact wrench. Customers rated the difficulty of this repair as Expert.

This oil pressure switch is designed for small gas engines to monitor lubrication levels and help protect the engine from damage caused by low oil pressure. Operating on a 12-volt system, it plays a key role in triggering warnings or engine shutdown when pressure drops below safe levels. Built for dependable performance, it’s a practical replacement for maintaining proper engine protection and reliable operation.

Designed to secure parts in place and spread the load, this Flange or Lock Nut is made of durable metal, is silver, is not part of a kit or assembly, and is sold individually. This part has been sourced directly from the original manufacturer. When the threads or ends become damaged or worn, it will no longer be able to hold pieces in p...Read morelace. At which point, it should be replaced. Refer to your owner's manual to determine if this is the correct part, as it is located in various locations on some machines. Customers rate this repair as Easy.

This is a genuine manufacturer-supplied tube assembly oil fill that is specially made for use with Kohler engines that are commonly installed on a variety of lawn and garden equipment. It is utilized to refill the oil in the cylinder assembly and to hold the dipstick for checking the oil level. It is a high-quality replacement for a damag...Read moreed or a missing part that was installed on a new unit. Check the diagrams for your model to ensure the proper repair procedure. Note, it is made of durable plastic and is sold as an individual item.

This is an authentic OEM component from Kohler. The oil cooler o-ring is made for use with many small engines, and is sold individually. The plastic o-ring is fitted inside the oil cooler, providing a protective seal. An Allen wrench and pliers are often required for the proper installation.

Throttle Cable Clamp

This genuine manufacturer-sourced part is specially designed for use with Kohler engines that are commonly installed on lawn and garden equipment. It is an important component which provides a tight seal for the governor cross shaft. If the seal is worn, damaged or missing, this will provide an identical replacement for the original part ...Read morethat was installed on a new unit. To ensure the correct repair procedure, check the diagrams for your model. Note, this high-quality seal is made of durable material and is sold individually.

This is a genuine replacement part for Kohler engines. The tube with dipstick kit is designed to fit onto the engine block and is used to display what level the motor oil is at. This part is made of high-quality material. This item is sold individually.