XT675-3084 Kohler Engine - Overview

This genuine OEM oil filter helps to remove harmful contaminants from engine oil. It is designed for a variety of Engines. It is sold Individually. This part maintains optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace an Oil Filter at least once a season.

This replacement push rod is specially designed for Kohler engines commonly installed on a variety of lawn and garden equipment. It is an authentic high-quality item that is sourced from the original equipment manufacturer. The rod is attached to the camshaft to push the exhaust valve open during the exhaust stroke. A bent pushrod can not...Read more only affect your engine\\\'s performance, but it can also seriously damage other parts if the problem is not taken care of immediately. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. It is made of durable metal and is sold individually. You will need a screwdriver and a wrench set to take the engine apart in order to perform this repair.

It is a genuine Kohler item that is supplied by the original equipment manufacturer for use with engines that are commonly installed on a variety of lawn and garden equipment. This is an identical replacement for a faulty or a missing hardware that was installed on a new unit. To ensure the proper repair procedure, refer to the appropriat...Read moree diagrams for your model. Keep in mind this high-quality part is made of durable metal and is sold as an individual item. A wrench set will be needed to replace it.

This authentic manufacturer-sourced gasket kit is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. The parts in this kit are utilized to ensure a tight fit between the cylinder and the cylinder head. Over time gaskets may wear out and begin to crack eventually requiring replacements. For the e...Read morexact locations and the correct installation of the new components, please refer to the appropriate diagrams of your model. This high-quality kit includes the head gasket, the intake port o-rings, the muffler gaskets, the intake manifold gaskets, the head bolt washers, the head bolt nuts and the installation instructions. You will need a wrench set to take the engine apart when performing this repair.

This is a high-quality manufacturer-sourced part which is made for use with Kohler engines commonly installed on lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal for the valve stem. Over time it may become brittle and begin to crack eventually requiring a replacement. For the proper applicatio...Read moren please refer to the appropriate diagrams of your model. This high-quality part is made of durable rubber material and is sold individually. You will need a screwdriver and a wrench set to take the engine apart and perform the repair.

It is an OEM item that is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. This is the valve that the push rod ride inside of which will push the exhaust valve open during the exhaust stroke. A bent push rod or a damaged lifter-valve can not only affect your engine\\\'s performance, they can s...Read moreeriously damage other parts if the problem is not taken care of immediately. This is a high-quality replacement for a missing or a damaged component that was installed on a new unit. To ensure the correct location and installation of this item, refer to the diagrams of your specific model. Note, one durable metal lifter-valve and a tube of lube are included. You will need a screwdriver and a wrench set to take apart the engine when performing this repair.

This primary air filter element in your lawn equipment filters the air that enters the engine for combustion. It is a cylindrical-shaped filter made of pleated paper and is typically located within the air cleaner housing secured by an end cap. The filter element has an inner safety element that provides an extra layer of protection. It m...Read moreeasures 10 1/2 inches in length with an outer diameter of 4 1/8 inches and an inner diameter of 2 1/2 inches. To determine if the filter element needs to be replaced check for visible signs of damage or excessive dirt buildup. A damaged or clogged element restricts airflow and allows dirt and debris to enter the engine resulting in reduced performance. To replace the filter element unhook the retaining clips and detach the end caps of your air cleaner housing from the machine. Remove the old element from the housing and insert the new one. Refer to your user manual for any specific installation instructions. Please note that this OEM-sourced filter element is sold individually and separately from the safety air filter element.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

Valve cover with seal and bolts.

This is an authentic replacement part manufactured for use with Kohler small engines. The valve springs are used to compress when the valve is open and extend to close the valve. The intake and exhaust valves use this spring, and it is sold individually.

This oil pressure switch is designed for small gas engines to monitor lubrication levels and help protect the engine from damage caused by low oil pressure. Operating on a 12-volt system, it plays a key role in triggering warnings or engine shutdown when pressure drops below safe levels. Built for dependable performance, it’s a practical replacement for maintaining proper engine protection and reliable operation.