XT675-3071 Kohler Engine - Overview

This oil seal is a genuine OEM replacement part designed for lawn and garden equipment. It is a small, circular rubber seal with a diameter of 2 3/8 inches, used to prevent oil leakage between the gear cover and gear shaft, and prevent the entry of contaminants. You will need to replace this oil seal if it is brittle, cracked, or has lost...Read more elasticity. A faulty seal will cause the gears to lose lubrication, increase friction damage, and prematurely wear down the parts. Remember to drain the oil from your equipment before beginning any repairs. Carefully pry the old seal from its mounting position and clear off any debris and residue on the area. Place the new seal in position and ensure it is securely fitted.

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This oil pressure switch is designed for small gas engines to monitor lubrication levels and help protect the engine from damage caused by low oil pressure. Operating on a 12-volt system, it plays a key role in triggering warnings or engine shutdown when pressure drops below safe levels. Built for dependable performance, it’s a practical replacement for maintaining proper engine protection and reliable operation.

Designed to secure parts in place and spread the load, this Flange or Lock Nut is made of durable metal, is silver, is not part of a kit or assembly, and is sold individually. This part has been sourced directly from the original manufacturer. When the threads or ends become damaged or worn, it will no longer be able to hold pieces in p...Read morelace. At which point, it should be replaced. Refer to your owner's manual to determine if this is the correct part, as it is located in various locations on some machines. Customers rate this repair as Easy.

This is an OEM part sourced directly from the manufacturer. The connector is commonly found in Kohler engines. This part is made of high-quality plastic, and is attached to the rectifier regulator to direct the path of wires that carry electrical signals. You may require a wrench when replacing this item. This product is available as an individual replacement part.

Exhaust pipe gasket.

This is an authentic OEM component from Kohler. The metal screw is made for use with many lawn and garden engines. Sold individually, this item often helps to secure the closure plate. A wrench is required for the removal and replacement. It is encouraged to purchase spares, as the screw can wear over time.

Used to supply support for the Governer Gear, this Governer Gear Shaft is an authentic item supplied by the original manufacturer. The Shaft is made of silver-colored metal and is sold individually, not as part of a kit or assembly. This part needs to be replaced when it shows signs of damage, wear, or it can no longer support the Governor Gear. Customers rated this repair as Medium difficulty.

Sold individually, not as part of a kit or assembly, this Govener Pin is a direct replacement part on over 150 models of small engines. The Govener Pin attaches to the Govener Gear. Over time, it may become damaged or worn and need to be replaced. You may need pliers to complete this repair. Customers rate this repair as Easy.