XT173-0084-ED Kohler Engine - Overview

This Spark Plug is a genuine OEM sourced replacement part for various small engines. It is white and silver, made of metal and ceramic components, and sold individually. The Spark Plug ignites the air-fuel mixture inside the combustion chamber. Before replacing, you can attempt to clean the spark plug with fine sandpaper of around 180 g...Read morerit, followed by spraying it with carburetor cleaner and wiping it dry. If this does not resolve your issue, it will need to be replaced. Ensure you gap and torque it to the manufacturer specifications. To complete this repair, you will need a spark plug socket, a socket set, and a torque wrench. Customers rate this repair as Easy.

This is an authentic Kohler replacement part that is manufactured for use with small engines. The stud is used to support the housing for the starter recoil assembly. These studs are sold as individual replacement parts.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

This replacement part is a genuine OEM sourced recoil starter assembly. It is specially manufactured for Kohler engines installed on lawn and garden equipment. This assembly allows user to pull-start the engine. It consists of a plastic shroud, starter pulley, starter spring, grip and the pull rope. Please note the screws to attach this s...Read moretarter assembly are sold separately. You will need a screwdriver to complete this repair. • Disconnect the spark plug • Remove the screws that secure the starter • Remove the old starter assembly • Secure the new assembly with the screws

This is a genuine manufacturer-supplied tube assembly oil fill that is specially made for use with Kohler engines that are commonly installed on a variety of lawn and garden equipment. It is utilized to refill the oil in the cylinder assembly and to hold the dipstick for checking the oil level. It is a high-quality replacement for a damag...Read moreed or a missing part that was installed on a new unit. Check the diagrams for your model to ensure the proper repair procedure. Note, it is made of durable plastic and is sold as an individual item.

This is an authentic manufacturer-sourced component that is specially manufactured for use with Kohler engines commonly installed on lawn and garden equipment. The stud is utilized to support the housing for the starter recoil assembly, please make sure to refer to the appropriate diagrams of your model for the correct location and applic...Read moreation of this part. Keep in mind this high-quality hardware is made of durable metal and is sold individually.

This replacement air cleaner element is specially designed for use with small gas powered engines on lawn and garden equipment. It is supplied directly from original equipment manufacturer. Its purpose is to filter out dust and debris from contaminating the carburetor and the engine. This is a pleated paper filter that is sold individuall...Read morey. Please note, the pre-filter is sold separately. To replace this filter no special tools are needed. Simply remove the cover and replace the filter element.

This is a genuine manufacturer-approved replacement fuel cap assembly which is designed for use with lawn and garden equipment. It is the part which is utilized to keep the fuel in the tank. This is a non-ventilated fuel cap which is made of durable black plastic and it is sold individually.

This is a genuine Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The shield is used to deflect heat between the carburetor and the cylinder. This kit also includes the spacer gasket that is used between the carburetor and the air cleaner base. The kits are sold individually.

This genuine OEM sourced item is specially designed for use with Kohler engines commonly installed on Toro lawn and garden equipment. It is the part of the recoil starter mechanism which allows a user to pull-start the engine. Please note one durable nylon rope with a plastic handle grip is included per order.