This Spark Plug is a genuine OEM sourced replacement part for various small engines. It is white and silver, made of metal and ceramic components, and sold individually. The Spark Plug ignites the air-fuel mixture inside the combustion chamber.
Before replacing, you can attempt to clean the spark plug with fine sandpaper of around 180 g...Read morerit, followed by spraying it with carburetor cleaner and wiping it dry. If this does not resolve your issue, it will need to be replaced. Ensure you gap and torque it to the manufacturer specifications. To complete this repair, you will need a spark plug socket, a socket set, and a torque wrench.
Customers rate this repair as Easy.
This is an authentic Kohler replacement part that is manufactured for use with small engines. The stud is used to support the housing for the starter recoil assembly. These studs are sold as individual replacement parts.
This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.
This is an authentic replacement part manufactured for use with Kohler small engines. The ignition module creates and electric charges as the magnet on the flywheel passes, the charge is sent to the spark plug to ignite the air/fuel mix in the combustion chamber. A faulty ignition module will likely prohibit the engine from starting while...Read more the motor maintains compression. This ignition module is available as an individual replacement part.
This replacement part is a genuine OEM sourced recoil starter assembly. It is specially manufactured for Kohler engines installed on lawn and garden equipment. This assembly allows user to pull-start the engine. It consists of a plastic shroud, starter pulley, starter spring, grip and the pull rope. Please note the screws to attach this s...Read moretarter assembly are sold separately. You will need a screwdriver to complete this repair. • Disconnect the spark plug • Remove the screws that secure the starter • Remove the old starter assembly • Secure the new assembly with the screws
This low-permeating fuel hose is a genuine OEM replacement designed for use on small engines. It carries fuel safely and efficiently from the tank to the carburetor while minimizing fuel vapor loss and resisting degradation from modern gasoline blends. Made from durable, fuel-resistant material, it’s intended to be cut to length during in...Read morestallation and is an ideal replacement when original fuel lines become brittle, cracked, or start leaking, helping restore safe and reliable engine operation.
This is an authentic manufacturer-sourced component that is specially manufactured for use with Kohler engines commonly installed on lawn and garden equipment. The stud is utilized to support the housing for the starter recoil assembly, please make sure to refer to the appropriate diagrams of your model for the correct location and applic...Read moreation of this part. Keep in mind this high-quality hardware is made of durable metal and is sold individually.
This replacement air cleaner element is specially designed for use with small gas powered engines on lawn and garden equipment. It is supplied directly from original equipment manufacturer. Its purpose is to filter out dust and debris from contaminating the carburetor and the engine. This is a pleated paper filter that is sold individuall...Read morey. Please note, the pre-filter is sold separately. To replace this filter no special tools are needed. Simply remove the cover and replace the filter element.
The base cover goes between the air cleaner element and the base. This is a genuine Kohler and Husqvarna part sourced directly from the manufacturer for use in engines. This item is available as an individual replacement part and is made of plastic. When replacing this item a wrench may be needed. Over time this item may break and will need to be replaced.