XT149-3311-ED Kohler Engine - Overview

This is an authentic Kohler replacement part that is manufactured for use with small engines. The stud is used to support the housing for the starter recoil assembly. These studs are sold as individual replacement parts.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

This replacement part is a genuine OEM sourced recoil starter assembly. It is specially manufactured for Kohler engines installed on lawn and garden equipment. This assembly allows user to pull-start the engine. It consists of a plastic shroud, starter pulley, starter spring, grip and the pull rope. Please note the screws to attach this s...Read moretarter assembly are sold separately. You will need a screwdriver to complete this repair. • Disconnect the spark plug • Remove the screws that secure the starter • Remove the old starter assembly • Secure the new assembly with the screws

This is a genuine replacement part sourced directly from the manufacturer. The fuel hose is commonly found in Kohler engines. This part is made of flexible rubber, and is used to carry fuel. You may require pliers when replacing this item. The fuel hose is sold as an individual replacement part.

This genuine OEM part is designed for use with Kohler engines commonly installed on a variety of lawn and garden equipment. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a ...Read moreteaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. To complete this repair you would need a screwdriver and a wrench set. Note, the kit includes one durable metal body carburetor and two gaskets to ensure a tight fit.

This is a genuine manufacturer-supplied tube assembly oil fill that is specially made for use with Kohler engines that are commonly installed on a variety of lawn and garden equipment. It is utilized to refill the oil in the cylinder assembly and to hold the dipstick for checking the oil level. It is a high-quality replacement for a damag...Read moreed or a missing part that was installed on a new unit. Check the diagrams for your model to ensure the proper repair procedure. Note, it is made of durable plastic and is sold as an individual item.

This is an authentic manufacturer-sourced component that is specially manufactured for use with Kohler engines commonly installed on lawn and garden equipment. The stud is utilized to support the housing for the starter recoil assembly, please make sure to refer to the appropriate diagrams of your model for the correct location and applic...Read moreation of this part. Keep in mind this high-quality hardware is made of durable metal and is sold individually.

This replacement spark plug is an authentic OEM item which is designed for use with Kohler engines commonly installed on lawn and garden equipment. A spark plug delivers electric current from an ignition system to an internal combustion engine. After some time spark plugs can become dirty or fouled. It is a good idea to replace the spark ...Read moreplug once this happens to ensure your engine runs properly. This high-quality item is sold individually. Note, you should gap your spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a properly sized socket wrench to remove the old and install the new spark plug.

This replacement air cleaner element is specially designed for use with small gas powered engines on lawn and garden equipment. It is supplied directly from original equipment manufacturer. Its purpose is to filter out dust and debris from contaminating the carburetor and the engine. This is a pleated paper filter that is sold individuall...Read morey. Please note, the pre-filter is sold separately. To replace this filter no special tools are needed. Simply remove the cover and replace the filter element.

This is a genuine Kohler replacement part. The auto-choke governor linkage is designed by the manufacturer for use in engines. This part is made of metal, and is used to link the choke lever with the choke in the carburetor, to help control the speed of the engine. You may require a wrench and pliers when replacing this item. This product is sold individually.

This genuine part is supplied directly from the original equipment manufacturer for use with Kohler engines that are commonly installed on a variety of lawn and garden equipment. The spring applies tension on the connected components. Check the diagrams for your model to ensure the exact location and the correct repair procedure. This spr...Read moreing is made of high-quality metal and is sold individually. Pliers might be needed to replace this hardware.