EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

XNE25JGKBFBB General Electric Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Temperature Sensor – Part Number: WR55X10025
$30.53
In Stock
Temperature Sensor
★★★★★
★★★★★
(69)
Part #WR55X10025
This sensor (Temperature Sensor, Thermistor, Refrigerator Temperature Sensor) sends the temperature reading of the compartment to the control board. If you notice your refrigerator is too warm, too cold, or not defrosting properly, then there may be a problem with your sensor. The temperature sensor can break from material fatigue or through normal use, and should be replaced. It is attached to the evaporator and control housing in your appliance. It measures approximately 1.25 inches long with 18 inch wire leads, and is constructed out of plastic. This part comes in white, beige. It includes the sensor, with wire leads.
Refrigerator Water Filter – Part Number: XWFE
$82.74
In Stock
Refrigerator Water Filter
★★★★★
★★★★★
(20)
Part #XWFE
This refrigerator water filter helps reduce chlorine taste, lead, and other listed impurities from drinking water and ice. It has a built-in chip that lets select refrigerators track filter use. Replace it about every six months or after 170 gallons, whichever comes first. Use the complete refrigerator model number to guarantee the proper fit. It can replace the older XWF filter in many models. No tools are usually needed. After installation, flush the filter with the amount of water listed in the owners manual.
Compression Ring – Part Number: WR02X12149
$16.05
In Stock
Compression Ring
★★★★★
★★★★★
(2)
Part #WR02X12149
This compression ring is meant to hold the evaporator fan motor in place in the freezer compartment of your refrigerator. This is is a genuine OEM part. The tools needed to complete this repair are a Phillips screw driver and small flat blade screw driver. Be sure to turn off your refrigerator before removing the evaporator fan cover so the fan does not turn on during repair. It is recommended to check the grommets, evaporator fan, and fan blades during repair in case they also need replacning. The compression ring may need replacing if the fan is noisy, or the refrigerator compartments are too warm. This part is sold individually.
Fastener Handle Assembly – Part Number: WR01X39781
$27.86
In Stock
Fastener Handle Assembly
★★★★★
★★★★★
(12)
Part #WR01X39781
This part is the replacement door handle fastener for your refrigerator. It is made of white plastic and metal, is sold individually, and measures approximately 1-1/4 inches by 1 inch. The door handle fastener allows you to connect your door handle to the refrigerator door. If your door handle is loose or missing, this is the part that will replace it. This part is an authentic OEM part sourced directly from the manufacturer.
Run Capacitor – Part Number: WR55X24064
$61.39
In Stock
Run Capacitor
★★★★★
★★★★★
(7)
Part #WR55X24064
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. This part has been updated by the manufacturer and may appear different than the original, but should function the same.
SHELF DOOR MODULE RH – Part Number: WR71X38291
$42.37
In Stock
SHELF DOOR MODULE RH
★★★★★
★★★★★
(21)
Part #WR71X38291
This refrigerator door bin is a functional storage accessory designed to attach securely to the interior of the right-hand door. Ideal for organizing jars, bottles, and other small items, it helps maximize usable space within the appliance. Made from durable plastic, it offers a snug fit and reliable performance. Installation is straightforward—refer to your refrigerator’s owner’s manual for step-by-step guidance. This bin is compatible with select models and serves as a direct replacement for damaged or missing door bins.
Condenser Fan Motor - 12V – Part Number: WR60X10209
$78.26
In Stock
Condenser Fan Motor - 12V
★★★★★
★★★★★
(3)
Part #WR60X10209
This DC fan motor moves air across the condenser coils and compressor to help remove heat. A failed motor may cause poor cooling, a hot compressor, or humming and squealing sounds. Before replacing it, clean the coils and check the fan blade, wiring, and air path for dirt or damage. Confirm fit with the full appliance model, 4-pin plug, and 11.3- to 12-volt rating. Unplug the refrigerator before removing the rear panel. Keep hands away from the blade, protect the cooling lines, and reinstall the panel before testing the unit.
Screw – Part Number: WR01X10065
$16.05
In Stock
Screw
★★★★★
★★★★★
(1)
Part #WR01X10065
Size: 10-32 GXTT FLP .595 Sold individually.
Hinge Cover Screw – Part Number: WR01X10379
$18.43
On Order
Hinge Cover Screw
★★★★★
★★★★★
(2)
Part #WR01X10379
Sold individually.
Defrost Thermostat – Part Number: WR50X10069
$36.95
In Stock
Defrost Thermostat
Part #WR50X10069
If your refrigerator isn’t defrosting properly, the defrost thermostat may be the cause. This component plays a key role in regulating the defrost cycle by monitoring the temperature and signaling when to activate or deactivate the defrost heater. A faulty thermostat can lead to frost buildup and cooling issues. Replacing it can restore proper function and help maintain consistent performance. Be sure to check your appliance’s model number to ensure compatibility before installation.
SUPPORT Vegetable PAN  ASM – Part Number: WR02X13504
$18.60
In Stock
SUPPORT Vegetable PAN ASM
Part #WR02X13504
SUPPORT Vegetable PAN ASM
Screw -  8-18 AB IHW 5/8 S – Part Number: WR01X10652
$15.00
In Stock
Screw - 8-18 AB IHW 5/8 S
Part #WR01X10652
Sold individually.

Questions And Answers for XNE25JGKBFBB

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maureen Smith-Davis - For model number XNE25JGKBFBB
April 5, 2026
This fridge stinks! We've cleaned and it smells foul! Replacing the filter might help i guess. Where are there other places mold could grow?
Chris Boyle Profile
Hi Maureen, thank you for reaching out. The water filter for your model is part number PS16217433. The drip pan collects moisture from the defrost cycle. Over time, stagnant water, food spills, and heat from the compressor create a perfect breeding ground for mold. Wash it with hot, soapy water and a splash of bleach or vinegar. The folds and grooves in the rubber door seals trap moisture and food debris. Scrub deep into the crevices using a toothbrush and a 50/50 vinegar-water solution or a mild bleach solution. We hope this solves your problem!
$82.74
In Stock
Refrigerator Water Filter
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the XNE25JGKBFBB

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
my refigerator was warm but the freezer was cold and working correcttly
305 of 404 people found this instruction helpful.
  • michele from North Smithfield, RI
  • Really Easy
  • 15 - 30 mins
  • Pliers
I went to a GE repair center to explain my problem, the service center reccomended that I have a techinician come out o look at it. $75.00 for the visit and what ever labor and materials wuld cost.

I went on line to see if there were others having this same problem and found that there were many with the same problem.
... Read more />After reading some of the ways that people found out what was wrong ...it became a matter of three components, the timer, heater or thermostat.

I tried the most common component and the less expensive one first , the thermostat switch I installed it very easily snipping two wires and attaching the news using wire nuts I used the diagram on this website to pinpoint the component and there has not been a problem since.
Was this helpful?
Thank you for voting!
refrigerator was getting too cold
149 of 218 people found this instruction helpful.
  • Larry from Menomonie, WI
  • A Bit Difficult
  • 15 - 30 mins
I removed the old temperature sensor by cutting the wires. I attached the wires of the new sensor with wire nuts and mounted it in the same bracket.
Was this helpful?
Thank you for voting!
Warm freezer and no ice
95 of 134 people found this instruction helpful.
  • Paul from Suwanee, GA
  • Easy
  • 30 - 60 mins
  • Nutdriver
This story starts with a GE side-by-side refrigerator that has always had wide temperature swings and a temperamental water dispenser. The ice maker was not making ice, and the built in digital thermometer showed it was running warm. I suspected that the heat exchanger was full of dust and so looked there. What I found was that the con denser tank was hot to the touch and the fan wasn’t running. As an experiment, I aimed a fan at the it for a while I saw that the freezer temperature dropped back to normal.
.The fan is marked as 11.2 DC so I checked for voltage at the fan and found some. With three wires and no wiring diagram I wasn’t sure this answered all the questions, but hooking the fan to a 12 volt power supply didn’t get it to spin.
I priced parts at a couple websites before using partselect.com . They also have a good diagram to look at (Sears diagrams are really poor). I ordered the part with 2-day shipping; it arrived on time, was correct and fixed the problem.
Was this helpful?
Thank you for voting!