My Orders
- Home
- XGF500PV1BB
- Instructions
XGF500PV1BB General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
A burnt out bulb
12 of 20 people
found this instruction helpful.
-
George from PALM COAST, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
After opening the Oven door, I removed the glass cover to view and locate the bulb, at the inside, top front of the Oven. Removed the burnt out bulb by pulling it in a forward motion towards the front of the Oven, slid the new bulb into place and the Oven is again functional.
Was this helpful?
Thank you for voting!
Hi output burner never worked correctly. Burned unevenly and created soot.
1 person
found this instruction helpful.
-
Drury from Newport, NH
- Very Easy
- Less than 15 mins
So for years have been struggling with this burner. Technicians could not figure out the problem. Then one day, I noticed that the top cover did not sit properly on the burner. Lifted up the burner with the cover on it and noticed that the burner itself was warped and deformed. The top cover never sat evenly on the burner. Ordered a
... Read more
new burner and put it in and presto. The burner work properly for the first time since we bought the stove. So, check the burners and see if the top cover sits evenly on the burner.
Read less
Was this helpful?
Thank you for voting!
Burnt out lamp bulb
5 of 15 people
found this instruction helpful.
-
Carl from MENIFEE, CA
- Really Easy
- Less than 15 mins
Remove oven light lens cover, remove the bulb and replace it with a new one.
Was this helpful?
Thank you for voting!