My Orders
X10002V1 Roper Air Conditioner - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
switch shaft was broken.
22 of 26 people
found this instruction helpful.
-
John from Burton, OH
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
ordered new part, removed old unit, noted where wires connect, installed new one, done.
Was this helpful?
Thank you for voting!
screw holes didn't line up
7 of 13 people
found this instruction helpful.
-
Dena from Coral Gables, FL
- Really Easy
- 30 - 60 mins
-
Screw drivers
I received the part the very next day which was awesome, but when I went to install it, there was a connection discrepency on the back of the switch, and the screw holes were completely off in the front where it connects to the unit. I ended up taking the whole thing apart to try to put the old face with the right screw holes on the new p
... Read more
art and ruined it.
Read less
Was this helpful?
Thank you for voting!
No Control Of Temp.
24 of 163 people
found this instruction helpful.
-
RICHARD from SAN ANTONIO, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers, Wrench set
The part was easy to remove and replace. Instructions were easy to understand. Once removed and replaced. The a/c worked great. I could control the temp and not be freezing all the time.
Was this helpful?
Thank you for voting!