This replacement element air cleaner is a genuine OEM sourced item, not an aftermarket imitation. It is specially designed for use with Honda engines. This filter is used to remove contaminants from the air that goes into the carburetor. Over time it will get clogged interfering with the airflow. No tools would be needed to replace this item.
This replacement part is made out of metal with fabric filter material. It is supplied directly from original equipment manufacturer for use with Honda engines. This is an in-tank fuel filter which makes sure that the fuel delivered to the engine is free of any debris or contaminants. It will over time become clogged and restrict the fuel...Read more getting to the engine so it will need to be replaced. Includes one (1) filter per order.
A loose or damaged filler cap may allow water to leak or air to enter the pump housing. This replacement cap closes the opening used to add water when priming the pump before operation. A secure seal helps the pump draw and move water correctly. Inspect the cap if the pump loses its prime or moisture appears around the opening. Other caus...Read morees, including a worn sealing ring, damaged threads, or leaking hose connections, should also be checked. Turn off the engine and allow it to cool before service. Clean the opening and avoid overtightening the cap during installation.
This is a genuine Honda part which is designed for use with small engines commonly installed on a variety of lawn and garden equipment. It is supplied directly from the original equipment manufacturer. This item provides a high-quality replacement for a missing or a faulty hardware that was installed on a new unit. The clip is utilized to...Read more secure the hose to the fuel filter. Make sure to refer to the appropriate diagrams of your model for the exact location and the correct application of this part. Keep in mind this high-quality clip is made of durable metal and is sold as an individual component. Replacing it is a simple task that should only require pliers to remove the old and secure the new.
This is an OEM Honda part manufactured for use with small engines. This rubber grommet is used to provide a seal to allow fuel lines to pass into and out of the fuel tank without leaking. Overtime fuel can deteriorate the grommet, so replacing it can ensure a good seal. The grommet is sold individually, please see model diagram for additional parts.
This replacement spark plug is a genuine OEM sourced component which is supplied for use with Honda engines commonly installed on lawn and garden equipment. A spark plug delivers electric current from an ignition system to an internal combustion engine. Over time spark plugs tend to become dirty or fouled eventually requiring replacement. Please note this high-quality item is sold individually.
This genuine manufacturer-sourced component is specially made for use with Honda engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a faulty tube that was installed on a new unit. This is the tube for fuel to return to the tank. Please make sure to refer to the appropriate diagrams of ...Read moreyour model for the correct location and application of this part. Keep in mind this high-quality tube is made of durable rubber and is sold individually.
It is an authentic replacement item that is supplied by the original equipment manufacturer for use with Honda engines commonly installed on lawn and garden equipment. The purpose of this cover is to secure and protect the air filter element which is sold separately. It is made from high-quality plastic and it is sold individually.
This is a genuine Honda replacement part, it is not an aftermarket imitation. The OEM sourced oil seal has been manufactured to be used with small engines. This item is used to form a seal around the crankshaft where it exits the crankcase assembly. The special oil seal is available as an individual replacement part.
This is an authentic item that is supplied by the original equipment manufacturer for use with Honda engines commonly installed on lawn and garden equipment. Please make sure to check the appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.
This cap is an authentic replacement part manufactured by Honda. It is commonly used in small engines. This black cap is designed to seal the opening of the fuel tank to prevent gasoline from spilling or leaking. It is made of plastic, and it should be replaced if it is cracked or damaged. It is sold individually.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles - For model number WX10T
April 1, 2026
Will not start suction even with starter fill loaded with water
Hi Charles, thank you for your inquiry. If your pump starts but won't pump water despite being primed, the most common issue is air leaking into the suction hose or a damaged, non-collapsible suction hose. Check the suction hose. The suction hose must be a reinforced, non-collapsible type. If it is collapsible, it will flatten under suction and fail to move water. If the hose is damaged, it will need to be replaced with part number PS12139969. Ensure the hose clamp on the suction port is tight. Glad to be of help!