The Door Rack (also known as a retainer bar) is a 23" white plastic part used to hold small items inside the fridge door. If broken, it should be replaced. Refer to your user manual and model number to determine if this part is correct for you. This is a simple part to repair and should not require any tools. Most customers found it to be...Read more very easy to simply snap the old rack out of place and snap the new one back in, making sure the locking tabs are secure. This part is sold individually and not as a part of a kit. It is certified by the original manufacturer.
This refrigerator door shelf bar is a genuine replacement component designed to restore secure storage within the door compartment of select refrigerator models. Measuring 24 inches in length and molded from durable white plastic, it attaches easily to the interior of the refrigerator door to hold bottles, condiments, and other small item...Read mores in place. Its design helps prevent spills and disorganization by keeping contents stable when the door is opened or closed. This part is compatible with a wide range of models from Frigidaire, Kenmore, and related brands such as Kelvinator, Gibson, and Electrolux. Installation is straightforward, requiring no tools—simply snap it into place. Replacement is recommended if the original bar is cracked, broken, loose, or no longer holds items securely. Always verify your refrigerator’s model number to ensure proper fit.
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If the existing bulb is broken in the socket, disconnect the power to the refrigerator and use a pair of needle nose pliers to grip the intern...Read moreal fragments of the bulb to unscrew. Replace with the new bulb and reconnect the power to the refrigerator. These bulbs are sold individually and are a commonly replaced part; consider ordering a spare.
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your fre...Read moreezer. If your refrigerator is too warm, will not start, or your freezer section is too warm, you may need to replace this part. This is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.
This is a dairy door for your refrigerator. This part covers the products in the dairy bin section. To access this section, simply lift the lid. This dairy door is made entirely of plastic and is transparent. It is almost 10 inches wide, and roughly 6 inches long. In order to make this repair you will not need any tools, as this part will easily clip in and out of place of the hinged holes.
This crisper drawer is designed to fit select refrigerator models and provides a dedicated space for storing fruits and vegetables. Made from high-quality transparent plastic, it helps maintain optimal humidity levels to extend the freshness of produce. The sliding design allows for easy access and organized storage. If your current drawe...Read morer is cracked or no longer functioning properly, replacing it ensures continued performance and helps preserve food quality.
This is a replacement hinge bearing for your refrigerator. The hinge bearing is found on the door hinge, and reduces friction when the door opens and closes. If the bearing is damaged, you may not be able to open or close the door properly, and in this case, it will need to be replaced. It is made of white plastic and is approximately 2 i...Read morenches long and 1 inch in diameter. This part is sold individually and is a genuine OEM part.
Improve door function and alignment with this hinge nylon washer, designed to support the door as it pivots on the hinge pin. Made from durable nylon, it helps reduce friction and noise while ensuring smooth opening and closing. By maintaining proper door positioning, it supports a secure seal and contributes to efficient operation and consistent cooling performance.
This cold control thermostat is a genuine replacement component designed to regulate the internal temperature of refrigerators. It functions by sensing the ambient temperature and cycling the compressor on or off to maintain the desired cooling level. By controlling the flow of electricity to the compressor, it ensures consistent performa...Read morence and prevents temperature fluctuations that could affect food preservation. This part is compatible with select refrigerator models and plays a critical role in maintaining energy efficiency and appliance reliability. Installation should be performed with the appliance unplugged, and model-specific instructions should be consulted for proper setup.
This part is the replacement door rack for your refrigerator freezer. It is made of white plastic and is approximately 23 inches by 5 inches in size. The door rack connects to your freezer door and allows you to store items on the door shelf, without the items falling out when you open or close the door. The main reason to replace the doo...Read morer rack would be if it is cracked, broken, or missing. To replace the door rack, carefully pop it out of the guide holes in the freezer door and snap the new rack into place. This part is sold individually and is a genuine OEM part.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator would not run but interior light was on.
184 of 248 peoplefound this instruction helpful.
Bruce from Alton, IL
Really Easy
Less than 15 mins
Pliers, Screw drivers
I unplugged the refrigerator, then opened the door and removed four screws holding the plastic electrical panel to the interior top of the main refrigerator compartment and noticed the cold control was corroded badly, apparently from moisture in the panel. I ordered a new one from partselect.com. When it arrived the next day, I then pul
... Read moreled off the control knob, unclipped the cold control, unplugged the three wires to the control, then removed the styrofoam insulation blocks holding the thermocouple wire and then removed the thermocouple wire to complete the removal. I then reversed the process to install the new thermostat and control. That is repositioned the thermocouple wire, put the insulation blocks back to hold the wire, then replugged the three electrical wires, clipped the control back and pushed the control knob back on and finally screwed the panel back to the top of the main compartment and plugged the refrigerator electrical cord back in to provide current to the refrigerator. It immediately started up and ran fine. Total time - about 8 minutes.
Read less
Was this helpful?
Thank you for voting!
Plastic fan broke
25 of 30 peoplefound this instruction helpful.
James from GLEN FLORA, TX
Really Easy
15 - 30 mins
Socket set, Wrench set
took the cover off (cardbord) the fan will come off and go back on by hand no tools needed i changed the fan motor just to be sure. 3 little screws hold it on. the plug only goes on one way u can't mess it up.very easy job u shouldn't have any problems doing it.Jim
- Unsnapped old light socket from top of Frig - Disconnected elect wires - Reconnected elect wires to new light socket - Snapped new socket in place - Done in less than 2 min.