Models > WWS445RFS1

WWS445RFS1 Westinghouse Washer - Overview

Sections of the WWS445RFS1

[Viewing 6 of 6]

Manuals & Care Guides for WWS445RFS1

Click to download
Keep searches simple, eg. "belt" or "pump".
Drive V-Belt – Part Number: 134511600
Drive V-Belt
★★★★★
★★★★★
(28)
PartSelect #: PS1146950
Manufacturer #: 134511600
This rubber V-style drive belt slips on the motor pulley to bring the basket to the required speed. If you notice a burning rubber smell or grinding noises coming from your washer, your washer does no...
$24.98
  In Stock
Order within the next 10 hrs and your part ships today!
Water Inlet Valve – Part Number: 134190200
Water Inlet Valve
★★★★★
★★★★★
(12)
PartSelect #: PS815509
Manufacturer #: 134190200
The water inlet valve has two ports for water to enter and controls the flow of water into a washing machine. Hot, cold, and warm water can easily enter the washer this way. If the water inlet valve i...
$127.89
  In Stock
Order within the next 10 hrs and your part ships today!
Screw-In Plastic Leveling Leg – Part Number: 134548800
Screw-In Plastic Leveling Leg
★★★★★
★★★★★
(4)
PartSelect #: PS1152204
Manufacturer #: 134548800
This is a screw in leveling leg for your washing machine. It supports the appliance by screwing in place to create a stable and flat surface. Take note that you are able to adjust the height of your a...
$25.99
  In Stock
Order within the next 10 hrs and your part ships today!
Tub Seal Assembly – Part Number: 5303279394
Tub Seal Assembly
★★★★★
★★★★★
(5)
PartSelect #: PS459481
Manufacturer #: 5303279394
If you have a leaky washer, then your tub seal may be the culprit. The tub seal assembly may also be known as the washer tub seal, and is a part for your washer. The function of this piece is to make ...
$74.92
  In Stock
Order within the next 10 hrs and your part ships today!
Tension Idler Pulley – Part Number: 131862900
Tension Idler Pulley
★★★★★
★★★★★
(5)
PartSelect #: PS418897
Manufacturer #: 131862900
The idler pulley on your washing machine allows the drive belt to operate smoothly. If your washer is not spinning or agitating, makes too much noise, or you notice a burning smell when it is operatin...
$22.06
  Special Order
Drain Hose – Part Number: 131461200
Drain Hose
★★★★★
★★★★★
(11)
PartSelect #: PS417877
Manufacturer #: 131461200
This drain hose is designed for use in your washer. The function of this part is to carry water from the drain pump to the house drain. If your washer is leaking or will not drain, you may need to rep...
$20.62
  In Stock
Order within the next 10 hrs and your part ships today!
Screw – Part Number: 131302800
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$11.23
  In Stock
Order within the next 10 hrs and your part ships today!
SCREW – Part Number: 131168200
SCREW
PartSelect #: PS417085
Manufacturer #: 131168200
Sold individually.
$11.77
  In Stock
Order within the next 10 hrs and your part ships today!
Washer Lid Lock with External Safety Switch – Part Number: 134101800
Washer Lid Lock with External Safety Switch
★★★★★
★★★★★
(1)
PartSelect #: PS648775
Manufacturer #: 134101800
Mounting bracket on this part replaces old style ( You may need to drill off old bracket before mounting new lock).
  No Longer Available
Dual Action Agitator – Part Number: 131605901
Dual Action Agitator
★★★★★
★★★★★
(4)
PartSelect #: PS418275
Manufacturer #: 131605901
$133.90
  In Stock
Order within the next 10 hrs and your part ships today!
Agitator Drive Block – Part Number: 134418700
Agitator Drive Block
★★★★★
★★★★★
(1)
PartSelect #: PS1152574
Manufacturer #: 134418700
The agitator drive block rotates the agitator assembly in your washer. If the drive block breaks down due to wear and tear the agitator will stop working. If you notice that your washer is making loud...
$63.50
  In Stock
Order within the next 10 hrs and your part ships today!
Spin Bearing – Part Number: 3204405
Spin Bearing
★★★★★
★★★★★
(1)
PartSelect #: PS446536
Manufacturer #: 3204405
The spin bearing, used for your washer, is located at the bottom of the outer tub near the transmission. The spin bearing carries the transmission shaft in the drive system, therefore ensuring the sha...
$77.59
  In Stock
Order within the next 10 hrs and your part ships today!

Questions And Answers for WWS445RFS1

Be the first to ask our experts a question about this model!

Common Symptoms of the WWS445RFS1

[Viewing 8 of 8]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replace broken drive belt
carefully pry up on front washer top to release plastic keeper pins,remove 2 phillips screws from beneath lower front washer panel,slightly lift upward on panel to release.remove old broken belt,push new belt beneath large tub pulley,put belt on small motor pulley,push back belt tension /idler arm,start belt on large tub pulley,turn tub pulley by hand to run belt on,release tension on idler arm.replace front panel and lower top.WALAAH!!!! you are done.
Parts Used:
Drive V-Belt
  • rodney from fairfield bay, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
277 of 309 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer Continued To Fill To Point Of Overflow
First I removed the top panel held by four screws at rear of panel, pulling the panel foward and up. Then disconnected the power and water connections. Then I removed the two screws holding the flow valve to the washer rear panel,pulled the valve foward ,removed the two electric connectors, pinched the water clamp with pliers and removed the water connection to the valve. Then replaced with the new valve followed the above steps in reverse order, finishing up by re placing the water connections and power. Then checked fo proper replacenent and leaks before replacing top panel.
Parts Used:
Water Inlet Valve
  • alvaro from east hampton, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
86 of 96 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clicking due to agitator dogs slipping
One bolt (after removing the fabric softener dispenser and a water tight cover you will see it). Remove the bolt and slide it straight up and then it's the reverse to put in the new one. Very simple repair and very inexpensive if you willing to do it yourself.
Parts Used:
Dual Action Agitator
  • BRIAN from UPLAND, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
81 of 102 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!