This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on th...Read moree appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
This washer lid lock assembly is designed to ensure safe and efficient operation of top-loading washing machines by securely locking the lid during wash and spin cycles. It prevents the machine from running when the lid is open, reducing the risk of injury and ensuring proper cycle completion. The assembly includes a latch switch that det...Read moreects lid position and communicates with the washer’s control system, helping to resolve issues such as failure to start, agitation problems, or difficulty opening or closing the lid. Compatible with a wide range of models, this component is engineered for reliable performance and long-term durability. Installation may require basic tools and should be performed with the appliance unplugged.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Affresh Washing Machine Cleaner includes three slow-dissolving tablets that help remove odor-causing residue from inside the washer. Suitable for all washer brands, including high-efficiency (HE) machines, the formula is also septic-safe. Place one tablet directly in the empty wash basket and run the Clean Washer cycle, or use a normal cycle with hot water. Use monthly or every 30 wash cycles for best results.
This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged, the washer lid may not open or close properly. The lid hinge is screwed into the washer lid. You will need a Phillips-head screwdriver to d...Read moreetach it. There will be a lid hinge on either side of the lid, so be sure to determine if you need to replace both hinges, or only one.
This is an impact absorber, also known as a sound dampening pad, for washing machines. This sound dampening pad attaches to the top of your washing machine drum to reduce the severity and harshness of vibrations and movement during the washing and spinning cycle, to produce a quieter laundry experience. If your washer is shaking excessive...Read morely during operation, this pad may be worn out or simply missing, and in need of replacement. To replace this pad, you will need a screwdriver or wrench to access the inner portion of your washing machine and remove the old one and install the new one. This OEM pad measures 5-inches by 3-inches and is sold individually.
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To complete this repair, you will need an Allen wrench, 3/8 inch socket, and a screwdriver. The repair will involved turning off the power and water supply, and tilting the washer on its front to access the sensor.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darlene - For model number WTW8500BW0
January 25, 2023
My cabrio platinum washer continues to give the UL error code. We replaced the springs and rods and checked the stator. I ran one one of clothes fine and the next load had another error. Would I need to replace the bearings?
Hello Darlene, thank you for reaching out. Try running a cycle without clothes in it to see if you also get the code. If the unit still gives you a UL error code without any clothes in it, the issue is with the rotary position sensor (RPS), part number PS11749664. That is the component that tells the electronic control board that the load is out of balance. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
The lid does not stay fully back when open and makes banging noise when closing. Suspect the hinge assembly worn, how do you get to these parts? Thank you
Hi Fred. Please refer to our video here: https://www.youtube.com/watch?v=CV_9vb2MXLo. Thank you for your question and good luck with your repair.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Dana - For model number WTW8500BW0
January 1, 2024
machine smells moldy and water comes over the gasket somes times. is there a clean out place like most washer machines? series c42370047
Hello Dana, thank you for your inquiry. Washer odors (like mildew) are usually caused by leaving the washer lid closed when the washer is not in use. This does not allow air to circulate and dry out the moisture remaining in the tub area. The air and moisture mixture becomes stagnant and creates an odor. When the washer is not in use, leaving the lid up/open for air circulation will help prevent odor. To get rid of the smell, try these ingredients. Baking Soda -1/4 cup of baking soda with an equal amount of water. Add this solution to your machine’s detergent. Vinegar -pour two cups of white vinegar into the drum, then run a normal cycle at high heat without any clothes. Clean any other parts of grime. Try these three things and the washer should be smelling no more. Also clean the drain tube. We hope this helps.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Adam - For model number WTW8500BW0
December 2, 2019
Trying to figure out what’s wrong. When turning the knob to select the wash, it jumps all around and never on the one it’s actually turned to. Washer still works but can select the specific wash cycle i want.
Hello Adam,
Thank you for your question. Our sources suggest that you replace the electronic control board for your model under part PS10067049 to fix the issue. Hope this helps!
My washing machine is showing at code and it's not spinning the code that my washing machine is showing is 5b and all the lights are on it
Hello Carrie, thank you for your question. This issue could be caused by a bad door lock, PartSelect Number: PS11756782, or sensor PartSelect Number: PS11749664. We would recommend testing/replacing those parts first. If they are ok, the issue could be with the main control board. I hope this helps.
Was this helpful?
Thank you for voting!
Prev
1
2
3
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The washer was making a horrible noise during the spin cycle
54 of 68 peoplefound this instruction helpful.
Kevin from CLARK, MO
Really Easy
30 - 60 mins
Pliers, Screw drivers, Socket set
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitratin
... Read moreg oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
Read less
Was this helpful?
Thank you for voting!
Error reading 5D - wouldn't spin
22 of 25 peoplefound this instruction helpful.
Theresa from WALFORD, IA
Easy
Less than 15 mins
Pliers, Screw drivers
3rd time replacing this part. The plastic grooves against the metal get wore down. Only 20$ to repair ! Take off the 3/8 bolt - center pops out. Remove screws pop out old piece and tighten new piece each side evenly.
Was this helpful?
Thank you for voting!
water would not discharge from tub.
20 of 24 peoplefound this instruction helpful.
Raymond from SEBASTIAN, FL
Really Easy
15 - 30 mins
Pliers, Socket set
replaced the drain pump which took about 10 minutes. removed 3 screws, unplug elec. wire, remove 2 water hoses, put back together in reverse.
My Orders
