This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
This washer lid lock assembly is designed for top-load washing machines and ensures the lid remains securely closed during wash and spin cycles. It replaces worn or malfunctioning latches, helping prevent the machine from starting or pausing when the lid isn’t properly shut. The assembly includes the solenoid mechanism that engages the lo...Read moreck, contributing to safe and efficient operation. Compatible with a wide range of models, it’s an ideal solution for restoring reliable performance to your appliance.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (PartSelect Number PS334663) to connect the extension to the existing drain hose.
This genuine Whirlpool lid lock bezel is a protective and decorative trim piece that frames the lid lock assembly on the top panel of your washing machine. It helps align the lid lock for proper closure, ensuring safe operation while enhancing the appliance’s appearance. If the original bezel is cracked, faded, or broken, replacing it res...Read moretores both function and aesthetics. Designed for compatibility with various Whirlpool, Maytag, KitchenAid, and Amana models, installation is quick—simply remove the damaged bezel and snap the new one into place.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert - For model number WTW8127LC1
December 4, 2024
drum noise while spinning and doesnt completely spin out
Hi Robert,
Thank you for your question. If the washer makes a noise during the spin cycle, there may be an object caught between the drum and washer panel, behind the seal, or in the lint trap. If it is a grinding noise your hear, the bearing on the gearcase may be worn or damaged and it will need to be replaced. We hope this helps!
The question has been asked before but I want to be sure I’m not missing something. My washer has a very loud repeating click noise during slow and fast spin cycles but is silent and works perfectly during agitation. The washer won’t even get up to speed on spin cycles.
Hi Patrick, thank you for reaching out. According to our research, the clutch is responsible for gradually bringing the tub up to speed. If it's worn or damaged, it can skip on the drive pulley's plastic teeth, causing a clicking noise and preventing the tub from reaching high RPMs. Replacing it might fix the issue. The part number is PS10064562. Good luck with this repair!
Washer shakes violently during the spin cycle, sounds like the drum is off kilter. Legs on machine or level. Is this a suspension kit of some kind and if so is it worth fixing?
Hi Max, thank you for contacting us. Yes, violent shaking and a drum that feels off-kilter during the high-speed spin cycle is usually caused by a failing washer suspension system. We would suggest replacing the suspension rod kit, part number W11400156. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Scratches in Surface
83 of 228 peoplefound this instruction helpful.
Michelle from Richardson, TX
Really Easy
Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this helpful?
Thank you for voting!
washing machine stuck on drain cycle
17 of 41 peoplefound this instruction helpful.
Matthew from Wauwatosa, WI
Easy
15 - 30 mins
Screw drivers
Siphon break kit keeps washing machine from continuing to siphon after rinse/cycle -- like emptying a pool with a hose. Fixed the problem of the tub never filling due to siphon draining out water as it's being put in.
Was this helpful?
Thank you for voting!
Needed to extend drain hose to reach drain
3 of 4 peoplefound this instruction helpful.
Emmett from WEATHERFORD, TX
A Bit Difficult
More than 2 hours
Socket set
Ordered drain hose extender. It uses a rubber flange with hose clip to attach to washer's plastic hose. When tightened, the hose clip crushes the plastic hose and crimps it, causing a leak. My solution was to find a copper pipe flange that was the same diameter as the interior of the plastic hose to act as a bushing for the plastic hose.
... Read moreThe hose clip could then be tightened without deforming the hose. Worked great with no leaks.