EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

WTW8100BW0 Whirlpool Washer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Basket Hub Kit – Part Number: W10820039
$35.80
In Stock
Basket Hub Kit
★★★★★
★★★★★
(30)
Part #W10820039
This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
Washer Hose Clamp – Part Number: WP596669
$7.47
In Stock
Washer Hose Clamp
★★★★★
★★★★★
(1)
Part #WP596669
This appliance hose clamp holds a hose firmly against its connection to help prevent leaks and keep it from slipping loose during operation. It applies pressure around the hose where it joins a pump port or other fitting. A bent, broken, corroded, or weakened clamp may allow water to drip from the connection or the hose to detach. Replacing a damaged clamp helps restore a secure connection. Disconnect power and shut off the water supply before servicing, then check for leaks after reassembly. This is an OEM part sourced directly from the manufacturer.
Washer Lid Lock Assembly – Part Number: WPW10619844
$81.00
In Stock
Washer Lid Lock Assembly
★★★★★
★★★★★
(26)
Part #WPW10619844
This washer lid lock assembly is designed to ensure safe and efficient operation of top-loading washing machines by securely locking the lid during wash and spin cycles. It prevents the machine from running when the lid is open, reducing the risk of injury and ensuring proper cycle completion. The assembly includes a latch switch that detects lid position and communicates with the washer’s control system, helping to resolve issues such as failure to start, agitation problems, or difficulty opening or closing the lid. Compatible with a wide range of models, this component is engineered for reliable performance and long-term durability. Installation may require basic tools and should be performed with the appliance unplugged.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(7)
Part #72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Screw – Part Number: WP488729
$7.47
In Stock
Screw
★★★★★
★★★★★
(1)
Part #WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
Hose Clamp – Part Number: WP285655
$9.62
In Stock
Hose Clamp
★★★★★
★★★★★
(2)
Part #WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Lid Hinge Mounting Screw – Part Number: WPW10119828
$7.47
In Stock
Lid Hinge Mounting Screw
★★★★★
★★★★★
(2)
Part #WPW10119828
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
Washer Hinge – Part Number: WP8563964
$9.62
In Stock
Washer Hinge
★★★★★
★★★★★
(6)
Part #WP8563964
This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged, the washer lid may not open or close properly. The lid hinge is screwed into the washer lid. You will need a Phillips-head screwdriver to detach it. There will be a lid hinge on either side of the lid, so be sure to determine if you need to replace both hinges, or only one.
Impact Absorber – Part Number: WP8564458
$9.62
In Stock
Impact Absorber
Part #WP8564458
This is an impact absorber, also known as a sound dampening pad, for washing machines. This sound dampening pad attaches to the top of your washing machine drum to reduce the severity and harshness of vibrations and movement during the washing and spinning cycle, to produce a quieter laundry experience. If your washer is shaking excessively during operation, this pad may be worn out or simply missing, and in need of replacement. To replace this pad, you will need a screwdriver or wrench to access the inner portion of your washing machine and remove the old one and install the new one. This OEM pad measures 5-inches by 3-inches and is sold individually.
Screw, 8-16 x 1.000 – Part Number: WP8533953
$7.47
In Stock
Screw, 8-16 x 1.000
Part #WP8533953
Sold individually.
Washer Sensor – Part Number: WPW10178988
$38.96
In Stock
Washer Sensor
★★★★★
★★★★★
(10)
Part #WPW10178988
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To complete this repair, you will need an Allen wrench, 3/8 inch socket, and a screwdriver. The repair will involved turning off the power and water supply, and tilting the washer on its front to access the sensor.
Spray Paint - 12 oz. - White – Part Number: 350930
No Longer Available
Spray Paint - 12 oz. - White
★★★★★
★★★★★
(3)
Part #350930
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a protective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.

Questions And Answers for WTW8100BW0

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Drew - For model number WTW8100BW0
January 10, 2024
washer shuts off with a UL code coming up on the display
Chris Boyle Profile
Hello Drew, thank you for your inquiry. If uL (unbalanced load) appears in display, the load is out of balance. The washer is running a load-balance correction routine. Allow the washer to continue. If the dial is flashing and the washer has stopped, redistribute the load, close the lid, and press START/PAUSE. You may also experience some vibration during spinning or the washer has stopped with the dial flashing. Load items in loose heaps evenly around the wash plate. Verify that the machine is level. Adding wet items to the washer or adding more water to the basket could unbalance the washer. Avoid washing single items. Balance a single item, such as a rug or jeans jacket, with a few extra items, such as towels. If the dial is flashing, redistribute the load, close the lid, and press START/PAUSE. Use Bulky/Sheets Deep Water Wash cycle for oversized, nonabsorbent items such as comforters or poly-filled jackets. Other items are not appropriate for the Bulky/Sheets cycle. See “Cycle Guide” in your use and care manual for more information on loading. If this does not help, we would recommend checking the suspension rod kit, part number PS2355518. We hope this information helps.
$124.60
In Stock
Suspension Rod Kit
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the WTW8100BW0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The washer was making a horrible noise during the spin cycle
54 of 68 people found this instruction helpful.
  • Kevin from CLARK, MO
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitratin g oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
Was this helpful?
Thank you for voting!
Error reading 5D - wouldn't spin
23 of 26 people found this instruction helpful.
  • Theresa from WALFORD, IA
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
3rd time replacing this part. The plastic grooves against the metal get wore down. Only 20$ to repair ! Take off the 3/8 bolt - center pops out. Remove screws pop out old piece and tighten new piece each side evenly.
Was this helpful?
Thank you for voting!
water would not discharge from tub.
20 of 24 people found this instruction helpful.
  • Raymond from SEBASTIAN, FL
  • Really Easy
  • 15 - 30 mins
  • Pliers, Socket set
replaced the drain pump which took about 10 minutes. removed 3 screws, unplug elec. wire, remove 2 water hoses, put back together in reverse.
Was this helpful?
Thank you for voting!