This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This door strike is an authentic OEM replacement part that is compatible with various models of top-load washing machines. The door strike is located along the door frame, where it engages with the la...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This is an inlet valve for your washing machine. The inlet valve is an electrically controlled valve with a solenoid that opens and closes as needed, during the water filling cycle of the washing mach...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This agitator assembly is an authentic OEM part that is compatible with various models of washing machines. It consists of a central shaft with a series of fins attached to it. When the washer is oper...
This is a shift actuator, and is designed for use in washing machines. This shift actuator is made to change the mode of the motor between spin and agitate, as well as communicate with the control boa...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This lid lock assembly is specially designed for top load washing machines. It is a genuine OEM part that is guaranteed to fit like the original. It includes the lid lock switch and the wiring harness...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
February 27, 2023
Machine will not cycle basket will not spin. Basket motor buzzes like it has power but doesn’t spin code E7 comes up
For model number WTW5105HW2
Hi James, thank you for your inquiry. F0E7 error indicates that load was detected while attempting to run the clean washer cycle. First, you need to check the load inside your washer, remove it, and then restart the clean washer cycle. If the problem persists, the only thing you need to do is rebalance the clothes and try the washer again. If the error will not reset, just unplug the washer for 60 seconds to reset the error. Then you can use your washer like normal again. Bulky items will commonly cause the washer to give you this error, and some things like rugs and sheets may never spin if they cannot balance themselves. Just understand you can keep trying over and over to rebalance the clothing if this error keeps coming up. If something cannot be spun out, you will need to ring out the items by hand. If this does not help you will need to replace the control board, part number PS16620433. We hope this is what you were looking for
I am replacing the gear case, is there an additional seal to the tub or is everything I need included in kit w11449840
For model number WTW5105HW2
Hello Rudy, thank you for contacting us. The gear case, part number PS16730207, fits your model and this is all you need to replace the gear case. The washer, part number PS16620404, is a separate part and is available separately. We hope this helps.
I received the gear case kit ,it came with a washer on it , I ordered another as you suggested is it necessary to install both washers, and still not sure if a seal is needed on the tub?
For model number WTW5105HW2
Hi Rudy, thank you for reaching out. Based on our research, you may install the gear case, part number PS16730207, with only one washer. Also, you may use a washer, part number PS16620404, as a seal between the tub and the gear case. We hope this sorts out your problem!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
