This splutch cam kit is a genuine replacement assembly designed for select Whirlpool, Maytag, and affiliated brand washing machines. It plays a critical role in the wash and spin cycles by engaging the drive motor to rotate the washer basket. The kit includes the clutch assembly, cam ring, spring, basket drive gear, pulley, and mounting n...Read moreut. Replacing this component can resolve issues such as noisy operation, slow or failed spinning, poor agitation, and excessive moisture in clothes after a cycle. In some cases, a burning smell may also indicate a failing clutch. Installation requires basic tools and should be performed with the appliance disconnected from power. Compatibility should be confirmed using your washer’s model number.
Affresh Washing Machine Cleaner includes three slow-dissolving tablets that help remove odor-causing residue from inside the washer. Suitable for all washer brands, including high-efficiency (HE) machines, the formula is also septic-safe. Place one tablet directly in the empty wash basket and run the Clean Washer cycle, or use a normal cycle with hot water. Use monthly or every 30 wash cycles for best results.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
This start capacitor is a key component in your top-load washer, providing the initial voltage surge needed to start the motor and keep the appliance running smoothly. If your washer won’t start or fails to agitate, the capacitor may be faulty and require replacement. Designed for compatibility with select models, this genuine replacement...Read more part helps restore reliable performance. Always disconnect power before installation and consult your washer’s manual to confirm fit.
This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (PartSelect Number PS334663) to connect the extension to the existing drain hose.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg - For model number WTW5015LW0
November 13, 2024
The door is locking when I go to reset! I put a load in and when I came downstairs, it was full of water and just sitting there. I unplugged it took all the clothes out, pushed it and it keeps clicking like it’s locking, but it’s not locking. That’s my question.
Hello Greg, Thank you for your inquiry. Researching your model, it sounds as if the lock has failed so we would recommend checking both the latch assembly and the strike. We hope this helps.
Hot water will not shut off and keeps filling the machine. Cold water cycles have no issues and run normal
Hello Robyn, thank you for reaching out. According to our research, replace the water inlet valve, part number PS16543460, to fix the issue. We hope this helps.
Washer is full of water and not working but blinking the Sense,Done and lock lid.
What does that mean? Do I need to replace?
Hi Sylvia, thank you for contacting us. The most common cause is a problem with the lid lock assembly itself. Its part number is PS16543458. You may need to replace it to fix the issue. We hope this solves your problem!
Hello Mark, thank you for getting in touch. If your washing machine is making loud noise, the gear case assembly, part number PS16730207, could be worn out or damaged and it will need replacement. The gear case have gears which changes as the machine speeds up. We hope this helps.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
71 of 107 peoplefound this instruction helpful.
David from BLOOMINGTON, IN
Easy
30 - 60 mins
Screw drivers, Socket set
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Was this helpful?
Thank you for voting!
Making loud noises.
20 of 29 peoplefound this instruction helpful.
Roy from BROOKLYN, NY
Really Easy
30 - 60 mins
Nutdriver, Pliers, Screw drivers, Socket set
The video you sent me was very helpful told me the exact tools I needed and how to do it. Thank you
Was this helpful?
Thank you for voting!
The wash cycle made a loud grinding noise when it went from filling to wash.
6 of 6 peoplefound this instruction helpful.
Angelo from PORTLAND, ME
Really Easy
15 - 30 mins
Screw drivers, Socket set, Wrench (Adjustable)
I put the dial to drain and and pressed the pause button for 3 seconds and it drained. Unplugged the washer from the electrical outlet . Shut the hot and cold water off. Disconnected and drained them. Placed the washer on a soft mat on front side exposing the back and bottom of the machine. Unscrew the metal cover wi
... Read moreth Philips head screw driver. Disconnect the drain hose to a bucket or small dish tub . Remove the belt cover with 5/8 ratchet or wrench. Using a ratchet or wrench remove the one bolt holding the clutch in place . Remove the two Philips head screws from the shift mechanism ( looks like clock timer,my memory is failing me right now sorry! ) . Pull down on bottom gear after removing nut. Push in and pull down with a flat head screwdriver on the tabs holding the collar in place above the top gear .The collar and gear and spring should come apart. Install new parts in the same order . Reassemble make sure to use Locktite 242 on the bottom nut holding the gear. Install belt , belt guard , cover drain hose . Stand machine back up , reconnect all hoses tightly plug machine into electrical outlet and start. Put a smile on your face because you did a great job and saved yourself some money!
My Orders
