This splutch cam kit is a genuine replacement assembly designed for select Whirlpool, Maytag, and affiliated brand washing machines. It plays a critical role in the wash and spin cycles by engaging the drive motor to rotate the washer basket. The kit includes the clutch assembly, cam ring, spring, basket drive gear, pulley, and mounting n...Read moreut. Replacing this component can resolve issues such as noisy operation, slow or failed spinning, poor agitation, and excessive moisture in clothes after a cycle. In some cases, a burning smell may also indicate a failing clutch. Installation requires basic tools and should be performed with the appliance disconnected from power. Compatibility should be confirmed using your washer’s model number.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Affresh Washing Machine Cleaner includes three slow-dissolving tablets that help remove odor-causing residue from inside the washer. Suitable for all washer brands, including high-efficiency (HE) machines, the formula is also septic-safe. Place one tablet directly in the empty wash basket and run the Clean Washer cycle, or use a normal cycle with hot water. Use monthly or every 30 wash cycles for best results.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (PartSelect Number PS334663) to connect the extension to the existing drain hose.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark - For model number WTW4655JW2
December 12, 2024
When is first turned on the pump engages and you hold the start button it stops and than when restarted it will fill and drain at the same time because the pump will not shut off.
Hi Mark, thank you for contacting us. Based on our understanding, we would suggest checking the control board, part number PS16744865. You may need to replace it to fix the issue. We hope this solves your problem!
Hello William, thank you for getting in touch. Ensure the drain hose isn't kinked, bent, or crushed, as this can restrict water flow. Check the drain pump, part number PS11770076. If there is debris or the drain pump is blocked, clear it. Also, do a continuity test, if the pump is faulty replace it. We hope this helps.
Hi Mike, thank you for reaching out. The issue could be with the water inlet valve, part number PS11773194. You may need to replace it to fix the issue. We hope this solves your problem!
WTW4655JW2 Whirlpool Washer, keeps trying to drain it goes for a hour. There is no water in there. Or, anything else. What should i do. Thank you.
Hi Dave, thank you for reaching out. According to our research, you need to inspect the water level pressure switch. A faulty pressure switch or a clogged/kinked hose leading to it can cause the machine to falsely believe there is water in the tub, signaling the pump to run constantly. You may need to replace it to fix the issue. The pressure switch in your model comes integrated into the control board. So, you might need to replace the control board to fix the issue. The part number is PS16744865. We hope this solves your problem!
Hi Ruben, thank you for contacting us. Ensure that the drain hose has been installed correctly. If it is fine, the issue could be with the control board, part number PS16744865. It serves as the central processing unit for managing cycles. You may need to replace it to fix the issue. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
71 of 107 peoplefound this instruction helpful.
David from BLOOMINGTON, IN
Easy
30 - 60 mins
Screw drivers, Socket set
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Was this helpful?
Thank you for voting!
Making loud noises.
20 of 29 peoplefound this instruction helpful.
Roy from BROOKLYN, NY
Really Easy
30 - 60 mins
Nutdriver, Pliers, Screw drivers, Socket set
The video you sent me was very helpful told me the exact tools I needed and how to do it. Thank you
Was this helpful?
Thank you for voting!
Scratches in Surface
83 of 227 peoplefound this instruction helpful.
Michelle from Richardson, TX
Really Easy
Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
My Orders
