This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$54.38
In Stock
Order within the next 5 hrs and your part ships today!
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
$33.94
In Stock
Order within the next 5 hrs and your part ships today!
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.00
In Stock
Order within the next 5 hrs and your part ships today!
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.10
In Stock
Order within the next 5 hrs and your part ships today!
This agitator is for washers.
Agitator rotates back and forth to move the clothes inside the tub to clean the load.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
$97.17
In Stock
Order within the next 5 hrs and your part ships today!
Order within the next 5 hrs and your part ships today!
Questions And Answers for WTW4655JW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brent
February 4, 2023
Not spinning or agitating. You can hear motor making an alternating noise. Replaced clutch didn't fix what should I check next.
For model number WTW4655JW0
Hello Brent, thank you for contacting us. The issue is probably related to a faulty drive hub kit, part number PS6012095. The drive hub is responsible for connecting the motor to the transmission, which powers the drum. If the drive hub is damaged or broken, it can cause the transmission to stop working, preventing the drum from agitating and spinning. If the drive hub kit is good, the issue is probably related to the shift actuator, part number PS11769864. If the shift actuator is damaged or malfunctioning, it may not be able to engage the drive belt, preventing the drum from spinning and agitating. We hope this solves your problem!
This model will fill with water and then drain before agitating or spin cycle. I ran through the manual mode and both the agitation and spin functions work. Seems like a sensor malfunction. Any thoughts?
For model number WTW4655JW0
Hi Shawn, thank you for your inquiry. Based on our understanding of the issue, we would suggest you check the electronic control board, part number PS16221218, as it is most likely faulty and may need to be replaced. We hope this information helps!
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned
... Read more it back up and got caught up on laundry. good day when the washer is fixed.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.