EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

WTW4300SW0 Whirlpool Washer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer Drive Pulley – Part Number: W10721967
$38.96
In Stock
Washer Drive Pulley
★★★★★
★★★★★
(23)
Part #W10721967
This splutch cam kit is a genuine replacement assembly designed for select Whirlpool, Maytag, and affiliated brand washing machines. It plays a critical role in the wash and spin cycles by engaging the drive motor to rotate the washer basket. The kit includes the clutch assembly, cam ring, spring, basket drive gear, pulley, and mounting nut. Replacing this component can resolve issues such as noisy operation, slow or failed spinning, poor agitation, and excessive moisture in clothes after a cycle. In some cases, a burning smell may also indicate a failing clutch. Installation requires basic tools and should be performed with the appliance disconnected from power. Compatibility should be confirmed using your washer’s model number.
Drive Hub Kit – Part Number: W10528947
$27.36
In Stock
Drive Hub Kit
★★★★★
★★★★★
(40)
Part #W10528947
This basket drive hub kit is a vital component in select washing machines, designed to connect the wash basket to the central drive shaft, enabling proper rotation during wash and spin cycles. It plays a key role in transferring motion from the motor to the basket, ensuring effective agitation and spinning. Constructed from durable materials, the kit typically includes the drive hub, a retainer, and installation instructions. Common symptoms of a worn or damaged hub include failure to agitate, slow or no spinning, excessive wobbling, and unusual noise during operation. Replacing this part is a common DIY solution and can restore the washer’s performance. Installation requires basic tools and moderate repair experience.
Washer Washer – Part Number: WP3949550
$12.85
In Stock
Washer Washer
★★★★★
★★★★★
(1)
Part #WP3949550
This part goes on the agitator retaining bolt.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(7)
Part #72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Washer D-Shaped Knob Insert – Part Number: WP8536939
$9.62
In Stock
Washer D-Shaped Knob Insert
★★★★★
★★★★★
(2)
Part #WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
Hose Clamp – Part Number: WP285655
$9.62
In Stock
Hose Clamp
★★★★★
★★★★★
(2)
Part #WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
ACTUATOR – Part Number: W11481722
$76.17
In Stock
ACTUATOR
★★★★★
★★★★★
(9)
Part #W11481722
This is a shift actuator, and is designed for use in washing machines. This shift actuator is made to change the mode of the motor between spin and agitate, as well as communicate with the control board how fast the washer is spinning. If the shift actuator in your washer is broken or bad, it can lead to the washer not spinning or agitating correctly and may even show an error code related to that. This shift actuator is made mostly of plastic but does feature a 120V/60HZ/2.8W motor. This actuator is an OEM part and is sold individually.
Screw, 8-16 x 1.000 – Part Number: WP8533953
$7.47
In Stock
Screw, 8-16 x 1.000
Part #WP8533953
Sold individually.
Washplate Bolt – Part Number: W10772621
$6.40
In Stock
Washplate Bolt
★★★★★
★★★★★
(1)
Part #W10772621
Sold individually.
Dryer Screw – Part Number: WPW10109200
$7.47
In Stock
Dryer Screw
Part #WPW10109200
11-16 x 3/4 Sold individually.
Washer Tub-to-Pump Hose – Part Number: W10899966
$27.36
In Stock
Washer Tub-to-Pump Hose
★★★★★
★★★★★
(2)
Part #W10899966
The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands
DRIVE BLOCK RETAINER – Part Number: W11385424
$11.77
In Stock
DRIVE BLOCK RETAINER
Part #W11385424

Common Symptoms of the WTW4300SW0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
71 of 107 people found this instruction helpful.
  • David from BLOOMINGTON, IN
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Was this helpful?
Thank you for voting!
Hub had warn its grooved teeth off and washer wouldnt agitate
66 of 93 people found this instruction helpful.
  • Allison from RICHFORD, NY
  • Easy
  • 15 - 30 mins
  • Screw drivers
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
Was this helpful?
Thank you for voting!
Waher would not spin and made noise
25 of 29 people found this instruction helpful.
  • Andrew from SYLVANIA, OH
  • Very Easy
  • Less than 15 mins
  • Screw drivers, Wrench (Adjustable)
Removed center cap, loosened center nut, pry lightly up on center plate and tap center nut. Center plate comes loose, remove nut, remove center plate. Pry lock clip out and remove, remove screw with electric impact (screw drive will work, but slower), remove drive hub. Install new drive hub (be sure to check screw hole alignment), install and tighten screws (be sure to follow a skip pattern and bring it down even), install lock clip, install center plate, install and tighten nut, replace center cap. Done!
Was this helpful?
Thank you for voting!